Flashforge Creator Pro

Flashforge Creator Pro
  • Usable Filament Diameter

    1.75 mm

  • Max Recommended Printing Speed

    100 mm/s

  • Build Area

    227 mm x 148 mm x 150 mm

  • Layer Height

    0.1 - 0.4 mm

Product Overview

The Flashforge Creator Pro is a 3D printer that offers both reliability and a wealth of features for the best in home use. The name says it all: this is a pro machine that's capable of printing at resolutions up to 0.2 mm, with 100 mm/s printing speed, and an extruder temperature up to 240 ºC. With direct-drive extruder, heated build plate, and 227 x 148 x 150mm build area, the Creator Pro gives you the freedom to create your world without limits.

Flashforge Creator Pro Specification


There's a direct drive extruder inside.

This direct drive extruder means that the extruder is mounted on the printhead. This then pushes the filament directly into, and out of, the hot end and into your print.

Extruder Type
direct drive

The usable filament diameter is a 1.75 mm diameter.

There are 2 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once.

The recommended maximum printing speed is 100 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like.

You'll get a 227 mm x 148 mm x 150 mm in the Flashforge Creator Pro, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area.

Usable Filament Diameter
1.75 mm
Max Power Consumption
320 W
Build Area
227 mm x 148 mm x 150 mm
Build Plate Attachment
Ambient Operating Temperature
18°C - 30°C
Max. Nozzle Temperature
240 ºC
Number of Extruders
Build Plate Leveling System
manual Leveling
Build Plate Surface
adhesive sheet
Open Filament System
Max Build Plate Temperature
120 ºC
Layer Height
0.1 - 0.4 mm
Extruder Construction Type Dual
Dual Head fixed height, manual adjustable
Total Mass Overall Dimensions
360 mm x 526 mm x 403 mm
0.2 mm
Build Chamber During Process
Open or Closed
Max Recommended Printing Speed
100 mm/s
USB Port
Hepa Filter
14.8 kg
360 mm x 526 mm x 403 mm
AC: 100 V - 230 V (47-63 Hz), DC: 24 V
Total Weight
14.8 kg

Where to buy the Flashforge Creator Pro

The lowest price is $385 for the Flashforge Creator Pro, available from ebay.com.

Flashforge Creator Pro 3d Printer Open Source Dual Extruder Dual Color

Reviews of the Flashforge Creator Pro


Based on 2 reviews

This is a good middle of the road printer at a moderate price
  • - 4
The FlashForge Creator Pro is an unimpressive but competent machine. It's not the nicest out there but it works well, is relatively easy to use — provided you swap to something other than ReplicatorG — and has plenty of potential. It's not the most turnkey solution available — purchasers shouldn't be afraid of a little tinkering and troubleshooting, due to the setup process and manual filament changes and bed leveling. However, it's a decent printer that can be a good launch point into the field.
Read Full Review Here
Flashforge Creator Pro Review
  • - 4
The FlashForge Creator Pro is not the best 3D printer out there, but it is a competent machine given the features it comes with at that price range. It is easy to use and can support the most commonly used filaments. Not to mention that it is affordably priced. If you are just developing an interest in 3D printing, this printer is a nice launch, however, if you're running on a budget you can find in some cheaper options our list of 3D printers under $500. Aside from the manual bed leveling and filament changes, you will have a comfortable time handling this 3D printer.
Read Full Review Here

Alternatives to the Flashforge Creator Pro