When you compare the Flashforge Creator Pro to the XYZprinting da Vinci 1.0 you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.
Based on 2 reviews
Flashforge Creator Pro | XYZprinting da Vinci 1.0 | |
---|---|---|
Overview | ||
Extruder Type | direct drive | IDEX |
Performance | ||
Usable Filament Diameter | 1.75 mm | 1.75 mm |
Max Power Consumption | 320 W | 200 W |
Build Area | 227 mm x 148 mm x 150 mm | 198 mm x 198 mm x 198 mm |
Build Plate Attachment | fixed | |
Ambient Operating Temperature | 18°C - 30°C | 15°C - 32°C |
Internal Memory | Yes / Memory Card Slot | |
Max. Nozzle Temperature | 240 ºC | |
Build Volume | 7.8 x 7.8 x 7.8" / 19.8 x 19.81 x 19.8 cm | |
Number of Extruders | 2 | 1 |
Build Plate Leveling System | manual Leveling | |
Filament Chamber Closed | Yes | |
Build Plate Surface | adhesive sheet | |
Open Filament System | Yes | |
Max Build Plate Temperature | 120 ºC | |
Layer Height | 0.1 - 0.4 mm | XY Axis: 100 to 400 micron / 0.1 to 0.4 mm (4 Settings) |
Usable Nozzle Type | 400 micron / 0.4 mm | |
Extruder Construction Type Dual | Dual Head fixed height, manual adjustable | |
Total Mass Overall Dimensions | 360 mm x 526 mm x 403 mm | |
Resolution | 0.2 mm | |
Build Chamber During Process | Open or Closed | Enclosed |
Max Recommended Printing Speed | 100 mm/s | |
Connectivity | ||
Cloud Control | Yes | |
USB Port | Yes | Yes |
WLAN | No | None |
Features | ||
Touchscreen | No | |
Hepa Filter | No | |
SD Card | Yes,SD-Card | |
Filament Runout Sensor | Yes | |
Camera | No | |
System | ||
Weight | 14.8 kg | 57.3 lb / 26 kg |
Dimensions | 360 mm x 526 mm x 403 mm | 18.4 x 20 x 22" / 46.74 x 50.8 x 55.88 cm |
Voltage | AC: 100 V - 230 V (47-63 Hz), DC: 24 V | 100 to 240 VAC, 50 / 60 Hz |
Total Weight | 14.8 kg | 57.3 lb / 26 kg |