About Creality
Creality CR-10 Max
Usable Filament Diameter
1.75 mm
Max Recommended Printing Speed
100 mm/s
Build Area
450 mm x 450 mm x 470 mm
Resolution
0.1 mm
Product Overview
The CR-10 Max has a build area of 450 x 450 x 470 mm and is designed for printing high quality prints. It comes with an aluminum plate build surface that is heated and comes with a BL Touch auto leveling system to ensure the print bed is always level. The CR-10 Max can be used with any 1.75mm filament and offers a resolution of 0.1 mm. The extruder is a bowden type, so it does not use a direct drive system, making it more reliable and less prone to jamming or clogging. It also features an all metal hot end for high temperature resistance.
Creality CR-10 Max Specification
| Overview There's a Bowden extruder inside. This Bowden extruder means that the extruder is mounted on the frame of the actual printer rather than the tip. The filament then travels through a PTFE tube to reach the hot end, and out onto the print. | |||
|---|---|---|---|
Extruder Type | Bowden | ||
| Performance The printer can use Cr-10S Pro nozzles. The usable filament diameter is a 1.75 mm diameter. There are 1 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. The recommended maximum printing speed is 100 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 450 mm x 450 mm x 470 mm in the Creality CR-10 Max, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. The build plate is made from Aluminum plate. | |||
Usable Filament Diameter | 1.75 mm | ||
Build Plate Material | Aluminum plate | ||
Max Power Consumption | 750 W | ||
Build Area | 450 mm x 450 mm x 470 mm | ||
Build Plate Attachment | clamp | ||
Ambient Operating Temperature | 5°C - 45°C | ||
Max. Nozzle Temperature | 250 ºC | ||
Number of Extruders | 1 | ||
Build Plate Leveling System | BL-Touch | ||
Build Plate Surface | adhesive sheet | ||
Open Filament System | Yes | ||
Max Build Plate Temperature | 110 ºC | ||
Total Mass Overall Dimensions | 790 mm x 648 mm x 880 mm | ||
Resolution | 0.1 mm | ||
Build Chamber During Process | open | ||
Max Recommended Printing Speed | 100 mm/s | ||
| Connectivity | |||
USB Port | Yes | ||
WLAN | No | ||
| Features | |||
Touchscreen | Yes | ||
Hepa Filter | No | ||
Filament Runout Sensor | Yes | ||
Powerloss Fail Safe | Yes | ||
| System | |||
Weight | 20 kg | ||
Dimensions | 790 mm x 648 mm x 880 mm | ||
Total Weight | 20 kg | ||
Reviews of the Creality CR-10 Max
3.0
Based on 1 reviews
The Bare Min
- 3
