Flashforge Creator Pro vs Original Prusa i3 MK3S+
When you compare the Flashforge Creator Pro to the Original Prusa i3 MK3S+ you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.
Flashforge Creator Pro4.0
Based on 2 reviews
Lowest prices
VS
Original Prusa i3 MK3S+4.3
Based on 4 reviews
Specs comparison between the two Printers
| Flashforge Creator Pro | Original Prusa i3 MK3S+ | |
|---|---|---|
| Overview | ||
| Extruder Type | direct drive | direct drive |
| Performance | ||
| Usable Filament Diameter | 1.75 mm | 1.75 mm |
| Max Power Consumption | 320 W | 120 W |
| Build Area | 227 mm x 148 mm x 150 mm | 210 mm x 210 mm x 250 mm |
| Build Plate Attachment | fixed | |
| Ambient Operating Temperature | 18°C - 30°C | |
| Internal Memory | ||
| Max. Nozzle Temperature | 240 ºC | 300 ºC |
| Build Volume | 210 mm x 210 mm x 250 mm | |
| Number of Extruders | 2 | 1 |
| Build Plate Leveling System | manual Leveling | Mesh Bed Levelling |
| Build Plate Surface | adhesive sheet | |
| Open Filament System | Yes | |
| Max Build Plate Temperature | 120 ºC | 120 ºC |
| Layer Height | 0.1 - 0.4 mm | 0.05 - 0.35 mm |
| Usable Nozzle Type | ||
| Extruder Construction Type Dual | Dual Head fixed height, manual adjustable | |
| Total Mass Overall Dimensions | 360 mm x 526 mm x 403 mm | 400 mm x 500 mm x 550 mm |
| Resolution | 0.2 mm | |
| Build Chamber During Process | Open or Closed | open |
| Resin Display Type | monochrome LCD | |
| Max Recommended Printing Speed | 100 mm/s | |
| Connectivity | ||
| USB Port | Yes | Yes |
| Ethernet Port | Yes | |
| WLAN | No | Yes |
| Features | ||
| Touchscreen | No | No |
| Hepa Filter | No | No |
| SD Card | Yes,SD-Card | Yes,SD-Card |
| Filament Runout Sensor | Yes | |
| System | ||
| Weight | 14.8 kg | 7 kg |
| Dimensions | 360 mm x 526 mm x 403 mm | 400 mm x 500 mm x 550 mm |
| Voltage | AC: 100 V - 230 V (47-63 Hz), DC: 24 V | |
| Total Weight | 14.8 kg | 7 kg |