About Omni3D
Compare the Omni3D Factory 2.0
Omni3D Factory 2.0
Usable Filament Diameter
1.75 mm
Max Recommended Printing Speed
167 mm/s
Build Area
500 mm x 500 mm x 500 mm
Layer Height
0.05 - 0.6 mm
Product Overview
Omni3D Factory 2.0 Specification
| Overview There's a direct drive extruder inside. This direct drive extruder means that the extruder is mounted on the printhead. This then pushes the filament directly into, and out of, the hot end and into your print. | |||
|---|---|---|---|
Extruder Type | direct drive | ||
| Performance The printer can use Volcano nozzles. The usable filament diameter is a 1.75 mm diameter. There are 2 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. The recommended maximum printing speed is 167 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 500 mm x 500 mm x 500 mm in the Omni3D Factory 2.0, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. The build plate is made from hardness glass. | |||
Usable Filament Diameter | 1.75 mm | ||
Build Plate Material | hardness glass | ||
Max Power Consumption | 2200 W | ||
Build Area | 500 mm x 500 mm x 500 mm | ||
Build Plate Attachment | clamp | ||
Ambient Operating Temperature | 15°C - 35°C | ||
Max. Nozzle Temperature | 360 ºC, 420 | ||
Number of Extruders | 2 | ||
Build Plate Leveling System | switch in hotend - auto adjusting | ||
Filament Chamber Closed | Yes | ||
Open Filament System | Yes | ||
Max Build Plate Temperature | 130 ºC | ||
Layer Height | 0.05 - 0.6 mm | ||
Extruder Construction Type Dual | Dual-head with electronic lifting system | ||
Total Mass Overall Dimensions | 1200 mm x 1070 mm x 770 mm | ||
Resolution | 0.08 mm | ||
Build Chamber During Process | closed | ||
Max Recommended Printing Speed | 167 mm/s | ||
Dual Build Area | 500 mm x 500 mm x 500 mm | ||
| Connectivity | |||
USB Port | No | ||
WLAN | No | ||
| Features | |||
Door Sensor | Yes | ||
Build Chamber Heater | Yes, max 70°C | ||
Touchscreen | Yes | ||
Hepa Filter | Yes | ||
Emergency Shutdown | Yes | ||
Filament Runout Sensor | Yes | ||
| System | |||
Weight | 190 kg | ||
Dimensions | 1200 mm x 1070 mm x 770 mm | ||
Voltage | AC: 110 V, 20 A / 230 V, 10 A (50/60 Hz) | ||
Total Weight | 190 kg | ||
