About Creatbot
CreatBot F1000
Usable Filament Diameter
1.75 mm
Max Recommended Printing Speed
120 mm/s
Build Area
1000 mm x 1000 mm x 1000 mm
Layer Height
0.05 - 0.6 mm
CreatBot F1000 Specification
| Overview There's a direct drive extruder inside. This direct drive extruder means that the extruder is mounted on the printhead. This then pushes the filament directly into, and out of, the hot end and into your print. | |||
|---|---|---|---|
Extruder Type | direct drive | ||
| Performance The printer can use MK8 nozzles. The usable filament diameter is a 1.75 mm diameter. There are 2 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. The recommended maximum printing speed is 120 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 1000 mm x 1000 mm x 1000 mm in the CreatBot F1000, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. The build plate is made from Borosilicate glass. | |||
Usable Filament Diameter | 1.75 mm | ||
Build Plate Material | Borosilicate glass | ||
Max Power Consumption | 10.000 W | ||
Build Area | 1000 mm x 1000 mm x 1000 mm | ||
Build Plate Attachment | fixed | ||
Ambient Operating Temperature | 15°C - 32°C | ||
Max. Nozzle Temperature | 420 ºC | ||
Number of Extruders | 2 | ||
Build Plate Leveling System | BL-Touch | ||
Filament Chamber Closed | Yes | ||
Open Filament System | Yes | ||
Max Build Plate Temperature | 100 ºC | ||
Layer Height | 0.05 - 0.6 mm | ||
Extruder Construction Type Dual | Dual-head with electronic lifting system | ||
Total Mass Overall Dimensions | 1300 mm x 1740 mm x 1920 mm | ||
Resolution | 0.1 mm | ||
Build Chamber During Process | Open or Closed | ||
Max Recommended Printing Speed | 120 mm/s | ||
Dual Build Area | 1000 mm x 1000 mm x 1000 mm | ||
| Connectivity | |||
USB Port | Yes | ||
WLAN | No | ||
| Features | |||
Build Chamber Heater | Yes, max 60°C | ||
Touchscreen | Yes | ||
Hepa Filter | Yes | ||
Emergency Shutdown | Yes | ||
Filament Runout Sensor | Yes | ||
Camera | Yes | ||
Powerloss Fail Safe | Yes | ||
| System | |||
Weight | 550 kg | ||
Dimensions | 1300 mm x 1740 mm x 1920 mm | ||
Voltage | AC: 220 V, 40A A - 240 V, 18 A (50-60 Hz) | ||
Total Weight | 550 kg | ||
