About Monoprice
Monoprice

Monoprice

  • Total Products

    245

  1. Printers
  2. Monoprice

Monoprice MP Voxel

  • Usable Filament Diameter

    1.75 mm

  • Max Recommended Printing Speed

    100 mm/s

  • Build Area

    150 mm x 150 mm x 150 mm

  • Layer Height

    0.05 mm

Product Overview

Monoprice MP Voxel Specification

Overview

It uses Fused Filament Fabrication 3d printer technology.

There's a Bowden extruder inside.

This Bowden extruder means that the extruder is mounted on the frame of the actual printer rather than the tip. The filament then travels through a PTFE tube to reach the hot end, and out onto the print.

Extruder Type
Bowden
Print Technology
Fused Filament Fabrication
Performance

The usable filament diameter is a 1.75 mm diameter.

The recommended maximum printing speed is 100 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like.

You'll get a 150 mm x 150 mm x 150 mm in the Monoprice MP Voxel, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area.

Usable Filament Diameter
1.75 mm
Max Power Consumption
150 W
Build Area
150 mm x 150 mm x 150 mm
Build Plate Attachment
clamp
Max. Nozzle Temperature
240 ºC
Build Plate Leveling System
Assisted Leveling
Filament Chamber Closed
Yes
Open Filament System
Yes
Max Build Plate Temperature
100 ºC
Layer Height
0.05 mm
Total Mass Overall Dimensions
400 mm x 380 mm x 405 mm
Resolution
50 - 400 µm
Build Chamber During Process
closed
Max Recommended Printing Speed
100 mm/s
Connectivity
Cloud Control
Yes
USB Port
Yes
Ethernet Port
Yes
WLAN
Yes
Features
Build Chamber Heater
Yes, max 60°C
Touchscreen
Yes
Hepa Filter
No
Filament Runout Sensor
Yes
Camera
Yes
System
Weight
9 kg
Dimensions
400 mm x 380 mm x 405 mm
Voltage
AC: 100 V - 240 V, (47 - 63 Hz)
Total Weight
9 kg

Reviews of the Monoprice MP Voxel

4.3

Based on 3 reviews

5
4
3
2
1
The best value for 3D printing beginners
tomsguide.com
  • - 4.4
The Monoprice Voxel represents a sweet spot of 3D printing at the moment, delivering a lot of features, high print quality and fast printing for a decent price. For around $400, it is more expensive than some entry- level printers, costing twice as much as the XYZ da Vinci Nano, though it's still not as costly as the Polaroid PlaySmart. The MP Voxel gives you a lot more for your money than less expensive printers for novices, with support for cloud printing and the heated print bed that makes printing both easier and cheaper. For that reason, the MP Voxel is a great pick for the casual user who is interested in 3D printing or a school or small office that wants to have a printer that several people can use.
Read Full Review Here
Monoprice Voxel Review_
gadgetreview.com
  • - 4.55
With support for cloud printing and a heated print bed, the Monoprice MP Voxel is at a sweet-spot in 3D printing. It’s not going to cost you an arm and a leg and it’s going to give you good printing quality for the price. Just make sure you have an Ethernet available in case the Wi-Fi goes buggy as the machine is prone to do.
Read Full Review Here
Monoprice Voxel 3D Printer In-Depth Review
pick3dprinter.com
  • - 4.05
Monoprice Voxel review clarifies that the 3D printer is made for beginners who wish to start 3D Printing without needing to go through tedious efforts. It is also for those users who are looking for a budget-friendly machine, however, not wishing to compromise with the print quality.
Read Full Review Here

Alternatives to the Monoprice MP Voxel