About XYZ Printing
XYZprinting da Vinci Jr. 1.0 3-in-1
Usable Filament Diameter
1.75 mm
Max Recommended Printing Speed
100 mm/s
Build Area
150 mm x 150 mm x 150 mm
Layer Height
XY Axis: 100 to 400 micron / 0.1 to 0.4 mm (4 Settings)
XYZprinting da Vinci Jr. 1.0 3-in-1 Specification
| Performance The printer can use 400 micron / 0.4 mm nozzles. The usable filament diameter is a 1.75 mm diameter. There are 1 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. The recommended maximum printing speed is 100 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 150 mm x 150 mm x 150 mm in the XYZprinting da Vinci Jr. 1.0 3-in-1, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. | |||
|---|---|---|---|
Usable Filament Diameter | 1.75 mm | ||
Max Power Consumption | 60 W | ||
Build Area | 150 mm x 150 mm x 150 mm | ||
Ambient Operating Temperature | 15°C - 32°C | ||
Build Volume | 5.9 x 5.9 x 5.9" / 15.0 x 14.99 x 15.0 cm | ||
Number of Extruders | 1 | ||
Build Plate Leveling System | Automatic Bed Leveling | ||
Filament Chamber Closed | Yes | ||
Layer Height | XY Axis: 100 to 400 micron / 0.1 to 0.4 mm (4 Settings) | ||
Build Chamber During Process | Enclosed | ||
Max Recommended Printing Speed | 100 mm/s | ||
| Connectivity | |||
USB Port | Yes | ||
WLAN | Wi-Fi 4 (802.11n) | ||
| Features | |||
Camera | No | ||
| System | |||
Weight | 26.5 lb / 12 kg | ||
Dimensions | 16.5 x 15 x 16.9" / 41.91 x 38.1 x 42.93 cm | ||
Total Weight | 26.5 lb / 12 kg | ||