About FlashForge
FlashForge Artemis Education
Usable Filament Diameter
1.75 mm
Max Recommended Printing Speed
50 to 80 mm/s
Build Area
190 mm x 195 mm x 200 mm
Layer Height
100 to 400 micron / 0.1 to 0.4 mm
FlashForge Artemis Education Specification
| Overview It uses Fused Filament Fabrication (FFF), Marketed as Fused Deposition Modeling (FDM) 3d printer technology. There's a direct extruder inside. This direct drive extruder means that the extruder is mounted on the printhead. This then pushes the filament directly into, and out of, the hot end and into your print. | |||
|---|---|---|---|
Extruder Type | direct | ||
Print Technology | Fused Filament Fabrication (FFF), Marketed as Fused Deposition Modeling (FDM) | ||
| Performance The printer can use 400 micron / 0.4 mm nozzles. The usable filament diameter is a 1.75 mm diameter. There are 1 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. The recommended maximum printing speed is 50 to 80 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 190 mm x 195 mm x 200 mm in the FlashForge Artemis Education, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. | |||
Usable Filament Diameter | 1.75 mm | ||
Max Power Consumption | 350 W | ||
Build Area | 190 mm x 195 mm x 200 mm | ||
Build Plate Attachment | magnetic | ||
Max. Nozzle Temperature | 500°F / 260°C | ||
Build Volume | 7.5 x 7.7 x 7.9" / 19.1 x 19.6 x 20.1 cm (1 Extruder) | ||
Number of Extruders | 1 | ||
Build Plate Leveling System | Automatic Bed Leveling | ||
Filament Chamber Closed | Yes | ||
Max Build Plate Temperature | 230°F / 110°C | ||
Layer Height | 100 to 400 micron / 0.1 to 0.4 mm | ||
Resolution | XY Axis: 11 micron / 0.011 mm Z Axis: 2.5 micron / 0.0025 mm | ||
Build Chamber During Process | Enclosed | ||
Max Recommended Printing Speed | 50 to 80 mm/s | ||
| Connectivity | |||
USB Port | Yes | ||
WLAN | Yes | ||
| Features | |||
Touchscreen | Yes | ||
Filament Runout Sensor | Yes | ||
Powerloss Fail Safe | Yes | ||
| System | |||
Weight | 22 lb / 10 kg | ||
Dimensions | 16.4 x 18.5 x 16" / 416 x 469 x 406 mm | ||
Voltage | 115 to 230 VAC, 50 / 60 Hz | ||
Total Weight | 22 lb / 10 kg | ||
