About Creality
Creality Ender-3 S1 Pro
Usable Filament Diameter
1.75 mm
Max Recommended Printing Speed
150 mm/s
Build Area
220 mm x 220 mm x 270 mm
Layer Height
100 to 400 micron / 0.1 to 0.4 mm
Creality Ender-3 S1 Pro Specification
| Overview It uses Fused Filament Fabrication (FFF), Marketed as Fused Deposition Modeling (FDM) 3d printer technology. There's a direct extruder inside. This direct drive extruder means that the extruder is mounted on the printhead. This then pushes the filament directly into, and out of, the hot end and into your print. | |||
|---|---|---|---|
Extruder Type | direct | ||
Print Technology | Fused Filament Fabrication (FFF), Marketed as Fused Deposition Modeling (FDM) | ||
| Performance The printer can use 400 micron / 0.4 mm (Included) nozzles. The usable filament diameter is a 1.75 mm diameter. There are 1 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. The recommended maximum printing speed is 150 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 220 mm x 220 mm x 270 mm in the Creality Ender-3 S1 Pro, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. The build plate is made from Steel. | |||
Usable Filament Diameter | 1.75 mm | ||
Build Plate Material | Steel | ||
Max Power Consumption | 350 W | ||
Build Area | 220 mm x 220 mm x 270 mm | ||
Build Plate Attachment | magnetic | ||
Max. Nozzle Temperature | 572°F / 300°C | ||
Build Volume | 8.7 x 8.7 x 10.6" / 22.0 x 22 x 27.0 cm | ||
Number of Extruders | 1 | ||
Build Plate Leveling System | Automatic Bed Leveling | ||
Open Filament System | Yes | ||
Max Build Plate Temperature | 212°F / 100°C | ||
Layer Height | 100 to 400 micron / 0.1 to 0.4 mm | ||
Build Chamber During Process | Open | ||
Max Recommended Printing Speed | 150 mm/s | ||
| Connectivity | |||
USB Port | Yes | ||
| Features | |||
Touchscreen | Yes | ||
Filament Runout Sensor | Yes | ||
Camera | No | ||
Powerloss Fail Safe | Yes | ||
| System | |||
Weight | 19 lb / 8.6 kg | ||
Dimensions | 19.3 x 24.6 x 17.9" / 490 x 625 x 455 mm | ||
Voltage | 100 to 240 VAC, 50 / 60 Hz | ||
Total Weight | 19 lb / 8.6 kg | ||
