About Creatbot
CreatBot F160 - PEEK Version
Usable Filament Diameter
1.75 mm
Max Recommended Printing Speed
300 mm/s
Build Area
160 mm x 160 mm x 200 mm
Layer Height
0.01 - 0.5 mm
Product Overview
CreatBot F160 - PEEK Version Specification
| Overview There's a direct drive extruder inside. This direct drive extruder means that the extruder is mounted on the printhead. This then pushes the filament directly into, and out of, the hot end and into your print. | |||
|---|---|---|---|
Extruder Type | direct drive | ||
| Performance The printer can use MK8 nozzles. The usable filament diameter is a 1.75 mm diameter. There are 1 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. The recommended maximum printing speed is 300 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 160 mm x 160 mm x 200 mm in the CreatBot F160 - PEEK Version, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. The build plate is made from Aluminum plate. | |||
Usable Filament Diameter | 1.75 mm | ||
Build Plate Material | Aluminum plate | ||
Max Power Consumption | 340 W | ||
Build Area | 160 mm x 160 mm x 200 mm | ||
Build Plate Attachment | fixed | ||
Ambient Operating Temperature | 15°C - 32°C | ||
Max. Nozzle Temperature | 420 ºC | ||
Number of Extruders | 1 | ||
Build Plate Leveling System | manual Leveling | ||
Build Plate Surface | BuildTak | ||
Open Filament System | Yes | ||
Max Build Plate Temperature | 150 ºC | ||
Layer Height | 0.01 - 0.5 mm | ||
Total Mass Overall Dimensions | 320 mm x 370 mm x 490 mm | ||
Resolution | 0.04 mm | ||
Build Chamber During Process | Open or Closed | ||
Max Recommended Printing Speed | 300 mm/s | ||
| Connectivity | |||
USB Port | Yes | ||
WLAN | No | ||
| Features | |||
Build Chamber Heater | Yes, max 70°C | ||
Touchscreen | Yes | ||
Hepa Filter | No | ||
Filament Runout Sensor | Yes | ||
Powerloss Fail Safe | Yes | ||
| System | |||
Weight | 18 kg | ||
Dimensions | 320 mm x 370 mm x 490 mm | ||
Voltage | AC: 100 V - 230 V (50-60 Hz) | ||
Total Weight | 18 kg | ||
