About Creatbot
CreatBot PEEK-300
Usable Filament Diameter
1.75 mm
Max Recommended Printing Speed
150 mm/s
Build Area
300 mm x 300 mm x 400 mm
Layer Height
0.04 - 0.5 mm
Product Overview
CreatBot PEEK-300 Specification
| Overview There's a direct drive extruder inside. This direct drive extruder means that the extruder is mounted on the printhead. This then pushes the filament directly into, and out of, the hot end and into your print. | |||
|---|---|---|---|
Extruder Type | direct drive | ||
| Performance The printer can use MK8 nozzles. The usable filament diameter is a 1.75 mm diameter. There are 2 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. The recommended maximum printing speed is 150 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 300 mm x 300 mm x 400 mm in the CreatBot PEEK-300, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. The build plate is made from Aluminum plate. | |||
Usable Filament Diameter | 1.75 mm | ||
Build Plate Material | Aluminum plate | ||
Max Power Consumption | 4600 W | ||
Build Area | 300 mm x 300 mm x 400 mm | ||
Build Plate Attachment | fixed | ||
Ambient Operating Temperature | 15°C - 32°C | ||
Max. Nozzle Temperature | 500 ºC | ||
Number of Extruders | 2 | ||
Build Plate Leveling System | BL-Touch | ||
Filament Chamber Closed | Yes | ||
Build Plate Surface | carbon fiber sheet, removable | ||
Open Filament System | Yes | ||
Max Build Plate Temperature | 200 ºC | ||
Layer Height | 0.04 - 0.5 mm | ||
Extruder Construction Type Dual | Dual-head with electronic lifting system | ||
Total Mass Overall Dimensions | 650 mm x 600 mm x 750 mm | ||
Resolution | 0.04 mm | ||
Build Chamber During Process | Open or Closed | ||
Max Recommended Printing Speed | 150 mm/s | ||
Dual Build Area | 300 mm x 300 mm x 400 mm | ||
| Connectivity | |||
USB Port | Yes | ||
WLAN | No | ||
| Features | |||
Build Chamber Heater | Yes, max 120°C | ||
Touchscreen | Yes | ||
Hepa Filter | Yes | ||
Emergency Shutdown | Yes | ||
Filament Runout Sensor | Yes | ||
Camera | Yes | ||
Powerloss Fail Safe | Yes | ||
| System | |||
Weight | 100 kg | ||
Dimensions | 650 mm x 600 mm x 750 mm | ||
Voltage | AC: 200 V - 240 V, 20 A (50-60 Hz) | ||
Total Weight | 100 kg | ||
