About Creatbot
Creatbot
  • Total Products

    245

CreatBot F160

CreatBot F160
  • Usable Filament Diameter

    1.75 mm

  • Max Recommended Printing Speed

    300 mm/s

  • Build Area

    160 mm x 160 mm x 200 mm

  • Layer Height

    0.01 - 0.5 mm

Product Overview

Our CreatBot F160 3D printer is a perfect introduction to 3D printing. This 3D printer has a build area of 160 mm x 160 mm x 200 mm and can print at speeds up to 300 mm/s. A lightweight aluminum build plate provides stable printing conditions and is easy to level manually. With a resolution of 0.04 mm and a max nozzle temperature of 420 ºC, this 3D printer is capable of producing high-quality prints for your industrial applications.

CreatBot F160 Specification

Overview

There's a direct drive extruder inside.

This direct drive extruder means that the extruder is mounted on the printhead. This then pushes the filament directly into, and out of, the hot end and into your print.

Extruder Type
direct drive
Performance

The printer can use MK8 nozzles.

The usable filament diameter is a 1.75 mm diameter.

There are 1 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once.

The recommended maximum printing speed is 300 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like.

You'll get a 160 mm x 160 mm x 200 mm in the CreatBot F160, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area.

The build plate is made from Aluminum plate.

Usable Filament Diameter
1.75 mm
Build Plate Material
Aluminum plate
Max Power Consumption
340 W
Build Area
160 mm x 160 mm x 200 mm
Build Plate Attachment
fixed
Ambient Operating Temperature
15°C - 32°C
Max. Nozzle Temperature
420 ºC
Number of Extruders
1
Build Plate Leveling System
manual Leveling
Build Plate Surface
BuildTak
Open Filament System
Yes
Max Build Plate Temperature
150 ºC
Layer Height
0.01 - 0.5 mm
Total Mass Overall Dimensions
320 mm x 370 mm x 490 mm
Resolution
0.04 mm
Build Chamber During Process
Open or Closed
Max Recommended Printing Speed
300 mm/s
Connectivity
USB Port
Yes
WLAN
No
Features
Touchscreen
Yes
Hepa Filter
No
Filament Runout Sensor
Yes
Powerloss Fail Safe
Yes
System
Weight
18 kg
Dimensions
320 mm x 370 mm x 490 mm
Voltage
AC: 100 V - 230 V (50-60 Hz)
Total Weight
18 kg

Alternatives to the CreatBot F160