About Creality
Compare the Creality CR-6 S
Creality CR-6 S
Usable Filament Diameter
1.75 mm
Max Recommended Printing Speed
100 mm/s
Build Area
235 mm x 235 mm x 250 mm
Layer Height
0.1 - 0.4 mm
Product Overview
Creality CR-6 S Specification
| Overview There's a Bowden extruder inside. This Bowden extruder means that the extruder is mounted on the frame of the actual printer rather than the tip. The filament then travels through a PTFE tube to reach the hot end, and out onto the print. | |||
|---|---|---|---|
Extruder Type | Bowden | ||
| Performance The printer can use MK8 nozzles. The usable filament diameter is a 1.75 mm diameter. There are 1 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. The recommended maximum printing speed is 100 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 235 mm x 235 mm x 250 mm in the Creality CR-6 S, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. The build plate is made from Carborundum glass plate. | |||
Usable Filament Diameter | 1.75 mm | ||
Build Plate Material | Carborundum glass plate | ||
Max Power Consumption | 350 W | ||
Build Area | 235 mm x 235 mm x 250 mm | ||
Build Plate Attachment | clamp | ||
Ambient Operating Temperature | 5°C - 45°C | ||
Max. Nozzle Temperature | 260 ºC | ||
Number of Extruders | 1 | ||
Build Plate Leveling System | pressure sensor | ||
Open Filament System | Yes | ||
Max Build Plate Temperature | 110 ºC | ||
Layer Height | 0.1 - 0.4 mm | ||
Total Mass Overall Dimensions | 442 mm x 462 mm x 540 mm | ||
Resolution | 0.1 mm | ||
Build Chamber During Process | open | ||
Max Recommended Printing Speed | 100 mm/s | ||
| Connectivity | |||
USB Port | Yes | ||
WLAN | No | ||
| Features | |||
Touchscreen | Yes | ||
Hepa Filter | No | ||
Filament Runout Sensor | Yes | ||
Powerloss Fail Safe | Yes | ||
| System | |||
Weight | 9.5 kg | ||
Dimensions | 442 mm x 462 mm x 540 mm | ||
Voltage | AC: 100 V - 230 V (50/60 Hz) | ||
Total Weight | 9.5 kg | ||
