About Creality
Creality CR-10 Smart Pro
Usable Filament Diameter
1.75 mm
Max Recommended Printing Speed
80 to 100 mm/s
Build Area
300 mm x 300 mm x 400 mm
Layer Height
100 to 400 micron / 0.1 to 0.4 mm
Creality CR-10 Smart Pro Specification
| Overview It uses Fused Filament Fabrication (FFF), Marketed as Fused Deposition Modeling (FDM) 3d printer technology. There's a direct extruder inside. This direct drive extruder means that the extruder is mounted on the printhead. This then pushes the filament directly into, and out of, the hot end and into your print. | |||
|---|---|---|---|
Extruder Type | direct | ||
Print Technology | Fused Filament Fabrication (FFF), Marketed as Fused Deposition Modeling (FDM) | ||
| Performance The printer can use 400 micron / 0.4 mm (Included) nozzles. The usable filament diameter is a 1.75 mm diameter. There are 1 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. The recommended maximum printing speed is 80 to 100 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 300 mm x 300 mm x 400 mm in the Creality CR-10 Smart Pro, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. The build plate is made from Steel. | |||
Usable Filament Diameter | 1.75 mm | ||
Build Plate Material | Steel | ||
Max Power Consumption | 350 W | ||
Build Area | 300 mm x 300 mm x 400 mm | ||
Build Plate Attachment | magnetic | ||
Max. Nozzle Temperature | 572°F / 300°C | ||
Build Volume | 11.8 x 15.7 x 11.8" / 30.0 x 40 x 30.0 cm | ||
Number of Extruders | 1 | ||
Build Plate Leveling System | Smart + Manual Leveling | ||
Open Filament System | Yes | ||
Max Build Plate Temperature | 212°F / 100°C | ||
Layer Height | 100 to 400 micron / 0.1 to 0.4 mm | ||
Resolution | XY Axis: 100 micron / 0.1 mm | ||
Build Chamber During Process | Open | ||
Max Recommended Printing Speed | 80 to 100 mm/s | ||
| Connectivity | |||
Cloud Control | Yes | ||
USB Port | Yes | ||
Ethernet Port | Yes | ||
WLAN | Yes | ||
| Features | |||
Touchscreen | Yes | ||
Filament Runout Sensor | Yes | ||
Camera | No | ||
| System | |||
Weight | 37.875 lb | ||
Voltage | 100 to 240 VAC, 50 / 60 Hz | ||
Total Weight | 37.875 lb | ||
