About Anycubic
Anycubic Mega X
Usable Filament Diameter
1.75 mm
Max Recommended Printing Speed
60 mm/s, 100 mm/s
Build Area
300 mm x 300 mm x 305 mm
Layer Height
0.05 - 0.3 mm
Product Overview
The Anycubic Mega X is a 3D printer with a 300 mm x 300 mm x 305 mm build area, and a heated bed that can reach up to 250 ºC. With an Ultrabase glass build plate material, you can use use the printer on almost any non-porous material without the need for a raft or suppor while the bowden extruder helps to ensure that no filament sticks to the nozzle and that it's easy to change colors during your print. With resolutions as fine as 0.01 mm, this 3D printer lets you create small, detailed objects at speeds up to 100 mm/s.
Anycubic Mega X Specification
| Overview It uses Fused Deposition Modeling 3d printer technology. There's a Bowden extruder inside. This Bowden extruder means that the extruder is mounted on the frame of the actual printer rather than the tip. The filament then travels through a PTFE tube to reach the hot end, and out onto the print. | |||
|---|---|---|---|
Extruder Type | Bowden | Bowden | |
Print Technology | Fused Deposition Modeling | ||
| Performance The printer can use RepRap M6 1,75mm nozzles. The usable filament diameter is a 1.75 mm diameter. There are 1 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. The recommended maximum printing speed is 60 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. The recommended maximum printing speed is 100 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 300 mm x 300 mm x 305 mm in the Anycubic Mega X, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. The build plate is made from Ultrabase glass. | |||
Usable Filament Diameter | 1.75 mm | 1.75 mm | |
Build Plate Material | Ultrabase glass | ||
Max Power Consumption | 350 W | ||
Build Area | 300 mm x 300 mm x 305 mm | 300 mm x 300 mm x 305 mm | |
Build Plate Attachment | clamp | ||
Ambient Operating Temperature | 8°C - 40°C | 8°C - 40°C | |
Max. Nozzle Temperature | 250 ºC | 250 ºC | |
Build Volume | 300 mm x 300 mm x 305 mm | ||
Number of Extruders | 1 | 1 | |
Build Plate Leveling System | manual Leveling | manual Leveling | |
Build Plate Surface | Ultrabase Glass | ||
Open Filament System | Yes | Yes | |
Max Build Plate Temperature | 90 ºC | 90 ºC | |
Layer Height | 0.05 - 0.3 mm | ||
Total Mass Overall Dimensions | 500 mm x 500 mm x 553 mm | 500 mm x 500 mm x 553 mm | |
Resolution | 50 - 300 µm | 0.01 mm | |
Build Chamber During Process | open | open | |
Max Recommended Printing Speed | 60 mm/s | 100 mm/s | |
| Connectivity | |||
USB Port | Yes | Yes | |
WLAN | No | ||
| Features | |||
Touchscreen | No | Yes | |
Hepa Filter | No | No | |
Filament Runout Sensor | Yes | Yes | |
Powerloss Fail Safe | Yes | ||
| System | |||
Weight | 19 kg | 14 kg | |
Dimensions | 500 mm x 500 mm x 553 mm | 500 mm x 500 mm x 553 mm | |
Voltage | AC: 110 V / 230 V (50/60 Hz) | ||
Total Weight | 19 kg | 14 kg | |
Reviews of the Anycubic Mega X
3.8
Based on 2 reviews
Mega Xperience?
- 3.5
A budget 3D printer with a MASSIVE build volume
- 4
