Anycubic Mega Zero 2.0

  • Usable Filament Diameter

    1.75 mm

  • Max Recommended Printing Speed

    60 mm/s

  • Build Area

    220 mm x 220 mm x 250 mm

  • Resolution

    100 µm

Product Overview

The Mega Zero 2.0 is an easy-to-use 3D printer that allows you to build high quality and precise 3D prints. This is a good choice for beginners, with its user-friendly interface and a variety of tutorials available online. The Mega Zero 2.0 features a build area of 220 mm x 220 mm x 250 mm and 1.75 mm filament, which will allow you to print impressive models in one go. The extruder type is bowden, which provides better printing quality than other types of extruders. With its 100 µm resolution, your prints will be highly detailed and accurate! This printer also has a maximum nozzel temperature of 255 ºC, making it perfect for various filament types (PLA, ABS, Nylon and more).

Anycubic Mega Zero 2.0 Specification


It uses Fused Deposition Modeling 3d printer technology.

There's a Bowden extruder inside.

This Bowden extruder means that the extruder is mounted on the frame of the actual printer rather than the tip. The filament then travels through a PTFE tube to reach the hot end, and out onto the print.

Extruder Type
Print Technology
Fused Deposition Modeling

The usable filament diameter is a 1.75 mm diameter.

There are 1 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once.

The recommended maximum printing speed is 60 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like.

You'll get a 220 mm x 220 mm x 250 mm in the Anycubic Mega Zero 2.0, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area.

The build plate is made from Sheet Metal.

Usable Filament Diameter
1.75 mm
Build Plate Material
Sheet Metal
Max Power Consumption
360 W
Build Area
220 mm x 220 mm x 250 mm
Build Plate Attachment
Ambient Operating Temperature
8°C - 40°C
Max. Nozzle Temperature
255 ºC
Build Volume
220 mm x 220 mm x 250 mm
Number of Extruders
Build Plate Leveling System
manual Leveling
Open Filament System
Max Build Plate Temperature
110 ºC
Total Mass Overall Dimensions
505 mm x 431 mm x 607 mm
100 µm
Build Chamber During Process
Max Recommended Printing Speed
60 mm/s
USB Port
Build Chamber Heater
Hepa Filter
Powerloss Fail Safe
7 kg
505 mm x 431 mm x 607 mm
AC: 100 V - 240 V, (50 / 60 Hz)
Total Weight
7 kg

Where to buy the Anycubic Mega Zero 2.0

The lowest price is $459.99 for the Anycubic Mega Zero 2.0, available from

Anycubic Mega Zero 2.0 Fdm 3d Printer

Reviews of the Anycubic Mega Zero 2.0


Based on 1 reviews

Anycubic Mega Zero 2.0 3D Printer In-Depth Review
  • - 4.35
Anycubic Mega Zero 2 has a simple design, is highly functional, available at a low cost, and yet has an amazing set of features. Agreed that the print quality is a little bit of a concern, but that’s not the only thing that is to be looked upon as a 3D printer, yeah?
Read Full Review Here

Alternatives to the Anycubic Mega Zero 2.0