300 mm x 300 mm x 400 mm
The Creality CR-10 v3 is a powerful and robust 3D printer with 300mm x 300mm x 400mm build area, which is large enough to print out your creative ideas in the highest detail. The CR-10 v3 features a 1.75 mm filament diameter, an extruder type with direct drive, and a Carborundum glass plate for printing. The CR-10 v3 also has a manual leveling system for the bed, which makes adjusting the bed level much easier than before. This 3D printer is perfect for beginners as well as professionals who are looking for an affordable machine that will stand up to the rigors of continuous use.
There's a direct drive extruder inside.
This direct drive extruder means that the extruder is mounted on the printhead. This then pushes the filament directly into, and out of, the hot end and into your print.
The printer can use MK8 nozzles.
The usable filament diameter is a 1.75 mm diameter.
There are 1 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once.
The recommended maximum printing speed is 100 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like.
You'll get a 300 mm x 300 mm x 400 mm in the Creality CR-10 v3, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area.
The build plate is made from Carborundum glass plate.
Usable Filament Diameter
Build Plate Material
|Carborundum glass plate|
|300 mm x 300 mm x 400 mm|
Build Plate Attachment
Ambient Operating Temperature
|5°C - 45°C|
Max. Nozzle Temperature
Number of Extruders
Build Plate Leveling System
Open Filament System
Max Build Plate Temperature
Build Chamber During Process
Max Recommended Printing Speed
Filament Runout Sensor
Powerloss Fail Safe
Based on 1 reviews