About FlashForge
FlashForge Creator Max 2
Usable Filament Diameter
1.75 mm
Max Recommended Printing Speed
10 to 100 mm/s
Build Area
200 mm x 148 mm x 150 mm
Layer Height
100 to 500 micron / 0.001 to 0.005 mm
FlashForge Creator Max 2 Specification
| Overview It uses Fused Filament Fabrication (FFF) 3d printer technology. There's a IDEX extruder inside. | |||
|---|---|---|---|
Extruder Type | IDEX | ||
Print Technology | Fused Filament Fabrication (FFF) | ||
| Performance The printer can use 4 micron / 0.004 mm (Included) nozzles. The usable filament diameter is a 1.75 mm diameter. There are 2 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. The recommended maximum printing speed is 10 to 100 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 200 mm x 148 mm x 150 mm in the FlashForge Creator Max 2, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. | |||
Usable Filament Diameter | 1.75 mm | ||
Build Area | 200 mm x 148 mm x 150 mm | ||
Build Volume | 7.9 x 5.8 x 5.9" / 20.1 x 14.7 x 15.0 cm | ||
Number of Extruders | 2 | ||
Filament Chamber Closed | Yes | ||
Max Build Plate Temperature | 248°F / 120°C | ||
Layer Height | 100 to 500 micron / 0.001 to 0.005 mm | ||
Build Chamber During Process | Enclosed | ||
Max Recommended Printing Speed | 10 to 100 mm/s | ||
| Connectivity | |||
USB Port | Yes | ||
| Features | |||
Touchscreen | Yes | ||
| System | |||
Weight | 33.1 lb / 15 kg | ||
Dimensions | 20.7 x 14.2 x 15.9" / 526 x 360 x 403 mm | ||
Voltage | 100 to 240 VAC, 50 / 60 Hz | ||
Total Weight | 33.1 lb / 15 kg | ||
