About FlashForge
FlashForge Creator 4-S
Usable Filament Diameter
1.75 mm
Max Recommended Printing Speed
150 to 200 mm/s
Build Area
400 mm x 350 mm x 500 mm
FlashForge Creator 4-S Specification
| Overview It uses Fused Filament Fabrication (FFF) 3d printer technology. There's a IDEX extruder inside. | |||
|---|---|---|---|
Extruder Type | IDEX | ||
Print Technology | Fused Filament Fabrication (FFF) | ||
| Performance The printer can use 400 micron / 0.4 mm (Included) nozzles. The usable filament diameter is a 1.75 mm diameter. There are 2 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. The recommended maximum printing speed is 150 to 200 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 400 mm x 350 mm x 500 mm in the FlashForge Creator 4-S, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. | |||
Usable Filament Diameter | 1.75 mm | ||
Build Area | 400 mm x 350 mm x 500 mm | ||
Build Plate Attachment | magnetic | ||
Max. Nozzle Temperature | 680°F / 360°C 608°F / 320°C | ||
Build Volume | 15.7 x 13.8 x 19.7" / 39.9 x 35.1 x 50.0 cm | ||
Number of Extruders | 2 | ||
Max Build Plate Temperature | 149°F / 65°C | ||
Build Chamber During Process | Enclosed | ||
Max Recommended Printing Speed | 150 to 200 mm/s | ||
| Connectivity | |||
Cloud Control | Yes | ||
Ethernet Port | Yes | ||
WLAN | Yes | ||
| Features | |||
Touchscreen | Yes | ||
Hepa Filter | Yes | ||
Filament Runout Sensor | Yes | ||
Camera | Yes | ||
Powerloss Fail Safe | Yes | ||
| System | |||
Weight | 198.4 lb / 90 kg | ||
Dimensions | 26.6 x 39.4 x 33.1" / 675 x 1000 x 840 mm | ||
Voltage | 100 to 240 VAC, 50 / 60 Hz | ||
Total Weight | 198.4 lb / 90 kg | ||
