About Creatbot
CreatBot DX Plus - Dual Extruder
Usable Filament Diameter
1.75 mm
Max Recommended Printing Speed
200 mm/s
Build Area
250 mm x 300 mm x 520 mm
Layer Height
0.05 - 0.5 mm
Product Overview
CreatBot DX Plus - Dual Extruder Specification
| Overview There's a Bowden extruder inside. This Bowden extruder means that the extruder is mounted on the frame of the actual printer rather than the tip. The filament then travels through a PTFE tube to reach the hot end, and out onto the print. | |||
|---|---|---|---|
Extruder Type | Bowden | ||
| Performance The printer can use CreatBot 1,75mm nozzles. The usable filament diameter is a 1.75 mm diameter. There are 2 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. The recommended maximum printing speed is 200 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 250 mm x 300 mm x 520 mm in the CreatBot DX Plus - Dual Extruder, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. The build plate is made from pyroceram glass. | |||
Usable Filament Diameter | 1.75 mm | ||
Build Plate Material | pyroceram glass | ||
Max Power Consumption | 360 W | ||
Build Area | 250 mm x 300 mm x 520 mm | ||
Build Plate Attachment | fixed | ||
Ambient Operating Temperature | 15°C - 32°C | ||
Max. Nozzle Temperature | 260 ºC | ||
Number of Extruders | 2 | ||
Build Plate Leveling System | manual Leveling | ||
Open Filament System | Yes | ||
Max Build Plate Temperature | 100 ºC | ||
Layer Height | 0.05 - 0.5 mm | ||
Extruder Construction Type Dual | Dual Head fixed height, manual adjustable | ||
Total Mass Overall Dimensions | 380 mm x 420 mm x 790 mm | ||
Resolution | 0.05 mm | ||
Build Chamber During Process | Open or Closed | ||
Max Recommended Printing Speed | 200 mm/s | ||
Dual Build Area | 250 mm x 300 mm x 520 mm | ||
| Connectivity | |||
USB Port | Yes | ||
WLAN | No | ||
| Features | |||
Touchscreen | Yes | ||
Hepa Filter | No | ||
Filament Runout Sensor | Yes | ||
Powerloss Fail Safe | Yes | ||
| System | |||
Weight | 30 kg | ||
Dimensions | 380 mm x 420 mm x 790 mm | ||
Voltage | AC: 100 V - 230 V (50-60 Hz) | ||
Total Weight | 30 kg | ||
