About Anycubic
Compare the Anycubic 4max Pro 2.0
Anycubic 4max Pro 2.0
Usable Filament Diameter
1.75 mm
Max Recommended Printing Speed
50 mm/s
Build Area
270 mm x 210 mm x 190 mm
Resolution
50 - 300 µm
Lowest prices
Product Overview
Anycubic 4max Pro 2.0 Specification
| Overview It uses Fused Deposition Modeling 3d printer technology. There's a Bowden extruder inside. This Bowden extruder means that the extruder is mounted on the frame of the actual printer rather than the tip. The filament then travels through a PTFE tube to reach the hot end, and out onto the print. | |||
|---|---|---|---|
Extruder Type | Bowden | ||
Print Technology | Fused Deposition Modeling | ||
| Performance The usable filament diameter is a 1.75 mm diameter. There are 1 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. The recommended maximum printing speed is 50 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 270 mm x 210 mm x 190 mm in the Anycubic 4max Pro 2.0, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. | |||
Usable Filament Diameter | 1.75 mm | ||
Max Power Consumption | 350 W | ||
Build Area | 270 mm x 210 mm x 190 mm | ||
Ambient Operating Temperature | 8°C - 40°C | ||
Max. Nozzle Temperature | 260 ºC | ||
Build Volume | 270 mm x 210 mm x 190 mm | ||
Number of Extruders | 1 | ||
Build Plate Leveling System | manual Leveling | ||
Filament Chamber Closed | Yes | ||
Build Plate Surface | Ultrabase Glass | ||
Open Filament System | Yes | ||
Max Build Plate Temperature | 100 ºC | ||
Total Mass Overall Dimensions | 454 mm x 466 mm x 410 mm | ||
Resolution | 50 - 300 µm | ||
Build Chamber During Process | closed | ||
Max Recommended Printing Speed | 50 mm/s | ||
| Connectivity | |||
USB Port | Yes | ||
| Features | |||
Build Chamber Heater | Yes | ||
Touchscreen | Yes | ||
Hepa Filter | No | ||
Filament Runout Sensor | Yes | ||
Powerloss Fail Safe | Yes | ||
| System | |||
Weight | 18.8 kg | ||
Dimensions | 454 mm x 466 mm x 410 mm | ||
Voltage | AC: 110 V - 220 V, (50 / 60 Hz) | ||
Total Weight | 18.8 kg | ||
Where to buy the Anycubic 4max Pro 2.0
The lowest price is $1129.99 for the Anycubic 4max Pro 2.0, available from ebay.com.
