About Ultimaker
Ultimaker S3
Usable Filament Diameter
2.85 mm
Build Area
230 mm x 190 mm x 200 mm
Layer Height
0.020 mm
Resolution
20 - 600 µm
Product Overview
The Ultimaker S3 is the world's most advanced 3D printer, delivering the fastest print speeds, the highest resolution and the best quality. The Ultimaker S3 is faster than ever before, with a print speed of up to 330 mm/s - that's 20% faster than its predecessor. With a maximum resolution of 600 microns and a build area of 230 mm x 190 mm x 200 mm, it delivers outstanding results. It features an extruder type bowden which improves accuracy and avoids clogging problems while the heated glass build plate provides excellent adhesion while remaining easy to remove prints from.
Ultimaker S3 Specification
| Overview It uses Fused Filament Fabrication 3d printer technology. There's a Bowden extruder inside. This Bowden extruder means that the extruder is mounted on the frame of the actual printer rather than the tip. The filament then travels through a PTFE tube to reach the hot end, and out onto the print. | |||
|---|---|---|---|
Extruder Type | Bowden | ||
Print Technology | Fused Filament Fabrication | ||
| Performance The usable filament diameter is a 2.85 mm diameter. There are 2 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. You'll get a 230 mm x 190 mm x 200 mm in the Ultimaker S3, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. The build plate is made from Heated Glass. | |||
Usable Filament Diameter | 2.85 mm | ||
Build Plate Material | Heated Glass | ||
Max Power Consumption | 350 W | ||
Build Area | 230 mm x 190 mm x 200 mm | ||
Ambient Operating Temperature | 15°C - 32°C | ||
Max. Nozzle Temperature | 280 ºC | ||
Build Volume | 230 mm x 190 mm x 200 mm | ||
Number of Extruders | 2 | ||
Build Plate Leveling System | Advanced Active Leveling | ||
Filament Chamber Closed | Yes | ||
Open Filament System | Yes | ||
Max Build Plate Temperature | 140 ºC | ||
Layer Height | 0.020 mm | ||
Extruder Construction Type Dual | Dual-head with electronic lifting system | ||
Total Mass Overall Dimensions | 394 mm x 489 mm x 637 mm | ||
Resolution | 20 - 600 µm | ||
Build Chamber During Process | closed | ||
| Connectivity | |||
Cloud Control | Yes | ||
USB Port | Yes | ||
Ethernet Port | Yes | ||
WLAN | Yes | ||
| Features | |||
Build Chamber Heater | Yes, max 60°C | ||
Touchscreen | Yes | ||
Hepa Filter | No | ||
Filament Runout Sensor | Yes | ||
Camera | Yes | ||
| System | |||
Weight | 14.4 kg | ||
Dimensions | 394 mm x 489 mm x 637 mm | ||
Voltage | AC: 100 V - 240 V, (50 - 60 Hz) | ||
Total Weight | 14.4 kg | ||
Where to buy the Ultimaker S3
The lowest price is $4421.53 for the Ultimaker S3, available from multiple sites. The 9 purchase links we have analyzed have revealed an average price of $4,957.