Ultimaker S3 vs Raise3D E2

When you compare the Ultimaker S3 to the Raise3D E2 you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.

Specs comparison between the two Printers

Ultimaker S3Raise3D E2
Extruder TypeBowdendirect drive
Print TechnologyFused Filament Fabrication
Usable Filament Diameter2.85 mm1.75 mm
Build Plate MaterialHeated GlassFlexible Steel Plate
Max Power Consumption350 W350 W
Build Area230 mm x 190 mm x 200 mm240 mm x 330 mm x 240 mm
Build Plate Attachmentmagnetic
Ambient Operating Temperature15°C - 32°C15°C - 30°C
Internal MemoryYes,8 Gbyte
Max. Nozzle Temperature280 ºC300 ºC
Build Volume230 mm x 190 mm x 200 mm
Number of Extruders22
Build Plate Leveling SystemAdvanced Active LevelingMesh-leveling with Flatness Detection
Filament Chamber ClosedYesYes
Build Plate SurfaceBuildTak
Open Filament SystemYesYes
Max Build Plate Temperature140 ºC110 ºC
Layer Height0.020 mm0.01 - 0.25 mm
Usable Nozzle TypeRaise3D Pro2
Extruder Construction Type DualDual-head with electronic lifting systemIDEX - Independent Dual Extruders
Total Mass Overall Dimensions394 mm x 489 mm x 637 mm596 mm x 607 mm x 465 mm
Resolution20 - 600 µm
Build Chamber During ProcessclosedOpen or Closed
Max Recommended Printing Speed150 mm/s
Dual Build Area240 mm x 295 mm x 240 mm
Cloud ControlYesYes
USB PortYesYes
Ethernet PortYesYes
Door SensorYes
Build Chamber HeaterYes, max 60°C
Hepa FilterNoYes
SD Card
Filament Runout SensorYesYes
Powerloss Fail SafeYes
Weight14.4 kg35 kg
Dimensions394 mm x 489 mm x 637 mm596 mm x 607 mm x 465 mm
VoltageAC: 100 V - 240 V, (50 - 60 Hz)AC: 100 V, 2 A / 230 V (50-60 Hz)
Total Weight14.4 kg35 kg

Other popular comparisons