About Snapmaker
Snapmaker 2.0 A150
Usable Filament Diameter
1.75 mm
Build Area
160 mm x 160 mm x 145 mm
Layer Height
0.05 - 0.3 mm
Product Overview
Snapmaker 2.0 A150 Specification
| Overview There's a direct drive extruder inside. This direct drive extruder means that the extruder is mounted on the printhead. This then pushes the filament directly into, and out of, the hot end and into your print. | |||
|---|---|---|---|
Extruder Type | direct drive | ||
| Performance The usable filament diameter is a 1.75 mm diameter. There are 1 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. You'll get a 160 mm x 160 mm x 145 mm in the Snapmaker 2.0 A150, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. The build plate is made from Flexible print sheet. | |||
Usable Filament Diameter | 1.75 mm | ||
Build Plate Material | Flexible print sheet | ||
Max Power Consumption | 320 W | ||
Build Area | 160 mm x 160 mm x 145 mm | ||
Build Plate Attachment | magnetic | ||
Max. Nozzle Temperature | 275 ºC | ||
Build Volume | 160 mm x 160 mm x 145 mm | ||
Number of Extruders | 1 | ||
Build Plate Leveling System | Automatic Bed Leveling | ||
Open Filament System | Yes | ||
Max Build Plate Temperature | 110 ºC | ||
Layer Height | 0.05 - 0.3 mm | ||
Total Mass Overall Dimensions | 360 mm x 316 mm x 390 mm | ||
Build Chamber During Process | Open or Closed | ||
| Connectivity | |||
USB Port | Yes | ||
WLAN | Yes | ||
| Features | |||
Build Chamber Heater | Yes | ||
Touchscreen | Yes | ||
Filament Runout Sensor | Yes | ||
Camera | Yes | ||
Powerloss Fail Safe | Yes | ||
| System | |||
Dimensions | 300 mm x 316 mm x 390 mm | ||
