About Snapmaker
Snapmaker
  • Total Products

    245

Snapmaker 2.0 F350

  • Usable Filament Diameter

    1.75 mm

  • Build Area

    320 mm x 350 mm x 330 mm

  • Layer Height

    0.05 - 0.3 mm

Product Overview

Snapmaker 2.0 F350 Specification

Overview

There's a direct drive extruder inside.

This direct drive extruder means that the extruder is mounted on the printhead. This then pushes the filament directly into, and out of, the hot end and into your print.

Extruder Type
direct drive
Performance

The usable filament diameter is a 1.75 mm diameter.

There are 1 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once.

You'll get a 320 mm x 350 mm x 330 mm in the Snapmaker 2.0 F350, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area.

The build plate is made from Flexible print sheet.

Usable Filament Diameter
1.75 mm
Build Plate Material
Flexible print sheet
Max Power Consumption
320 W
Build Area
320 mm x 350 mm x 330 mm
Build Plate Attachment
magnetic
Max. Nozzle Temperature
275 ºC
Build Volume
320 mm x 350 mm x 330 mm
Number of Extruders
1
Build Plate Leveling System
Automatic Bed Leveling
Max Build Plate Temperature
80 ºC
Layer Height
0.05 - 0.3 mm
Total Mass Overall Dimensions
495 mm x 506 mm x 580 mm
Build Chamber During Process
Open or Closed
Connectivity
USB Port
Yes
WLAN
Yes
Features
Build Chamber Heater
Yes
Touchscreen
Yes
Filament Runout Sensor
Yes
Camera
Yes
Powerloss Fail Safe
Yes
System
Dimensions
495 mm x 506 mm x 580 mm

Alternatives to the Snapmaker 2.0 F350