About Formbot
Formbot Voron V0.1
Usable Filament Diameter
1.75 mm
Max Recommended Printing Speed
250 mm/s
Build Area
120 mm x 120 mm x 120 mm
Layer Height
0.05 - 0.3 mm
Product Overview
Formbot Voron V0.1 Specification
| Performance The printer can use RepRap M6 1,75mm nozzles. The usable filament diameter is a 1.75 mm diameter. There are 1 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. The recommended maximum printing speed is 250 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 120 mm x 120 mm x 120 mm in the Formbot Voron V0.1, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. The build plate is made from Flexible Steel Plate. | |||
|---|---|---|---|
Usable Filament Diameter | 1.75 mm | ||
Build Plate Material | Flexible Steel Plate | ||
Max Power Consumption | 150 W | ||
Build Area | 120 mm x 120 mm x 120 mm | ||
Build Plate Attachment | magnetic | ||
Max. Nozzle Temperature | 300 ºC | ||
Number of Extruders | 1 | ||
Build Plate Surface | PEI | ||
Open Filament System | Yes | ||
Max Build Plate Temperature | 110 ºC | ||
Layer Height | 0.05 - 0.3 mm | ||
Build Chamber During Process | Open or Closed | ||
Max Recommended Printing Speed | 250 mm/s | ||
