About Raise3D
Compare the Raise3D Pro3
Raise3D Pro3
Usable Filament Diameter
1.75 mm
Max Recommended Printing Speed
150 mm/s
Build Area
300 mm x 300 mm x 300 mm
Layer Height
0.01 - 0.25 mm
Product Overview
Raise3D Pro3 Specification
| Overview There's a direct drive extruder inside. This direct drive extruder means that the extruder is mounted on the printhead. This then pushes the filament directly into, and out of, the hot end and into your print. | |||
|---|---|---|---|
Extruder Type | direct drive | ||
| Performance The printer can use Raise3D Pro2 nozzles. The usable filament diameter is a 1.75 mm diameter. There are 2 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. The recommended maximum printing speed is 150 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 300 mm x 300 mm x 300 mm in the Raise3D Pro3, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. The build plate is made from Flexible Steel Plate. | |||
Usable Filament Diameter | 1.75 mm | ||
Build Plate Material | Flexible Steel Plate | ||
Max Power Consumption | 600 W | ||
Build Area | 300 mm x 300 mm x 300 mm | ||
Build Plate Attachment | magnetic | ||
Ambient Operating Temperature | 15°C - 30°C | ||
Max. Nozzle Temperature | 300 ºC | ||
Number of Extruders | 2 | ||
Build Plate Leveling System | Mesh-leveling with Flatness Detection | ||
Filament Chamber Closed | Yes | ||
Build Plate Surface | BuildTak | ||
Open Filament System | Yes | ||
Max Build Plate Temperature | 120 ºC | ||
Layer Height | 0.01 - 0.25 mm | ||
Extruder Construction Type Dual | Dual-head with electronic lifting system | ||
Total Mass Overall Dimensions | 620 mm x 626 mm x 760 mm | ||
Build Chamber During Process | Open or Closed | ||
Max Recommended Printing Speed | 150 mm/s | ||
Dual Build Area | 255 mm x 300 mm x 300 mm | ||
| Connectivity | |||
Cloud Control | Yes | ||
USB Port | Yes | ||
Ethernet Port | Yes | ||
WLAN | Yes | ||
| Features | |||
Door Sensor | Yes | ||
Touchscreen | Yes | ||
Hepa Filter | Yes | ||
Filament Runout Sensor | Yes | ||
Camera | Yes | ||
Powerloss Fail Safe | Yes | ||
| System | |||
Weight | 52.5 kg | ||
Dimensions | 620 mm x 626 mm x 760 mm | ||
Voltage | AC: 100 V - 240 V, 3,3 A (50/60 Hz) | ||
Total Weight | 52.5 kg | ||
