About Prusa
Original Prusa XL
Usable Filament Diameter
1.75 mm
Build Area
360 mm x 360 mm x 360 mm
Product Overview
Original Prusa XL Specification
| Overview It uses Fused Deposition Modeling 3d printer technology. There's a direct drive extruder inside. This direct drive extruder means that the extruder is mounted on the printhead. This then pushes the filament directly into, and out of, the hot end and into your print. | |||
|---|---|---|---|
Extruder Type | direct drive | ||
Print Technology | Fused Deposition Modeling | ||
| Performance The usable filament diameter is a 1.75 mm diameter. You'll get a 360 mm x 360 mm x 360 mm in the Original Prusa XL, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. | |||
Usable Filament Diameter | 1.75 mm | ||
Build Area | 360 mm x 360 mm x 360 mm | ||
Build Plate Attachment | magnetic | ||
Build Volume | 360 mm x 360 mm x 360 mm | ||
Build Plate Leveling System | switch in hotend - auto adjusting | ||
Build Plate Surface | PEI | ||
Total Mass Overall Dimensions | 800 mm x 800 mm x 900 mm | ||
Build Chamber During Process | Open or Closed | ||
| Connectivity | |||
Ethernet Port | Yes | ||
| Features | |||
Touchscreen | No | ||
Hepa Filter | No | ||
Filament Runout Sensor | Yes | ||
Powerloss Fail Safe | Yes | ||
| System | |||
Dimensions | 800 mm x 800 mm x 900 mm | ||
