About Monoprice
Compare the Monoprice Mini Delta V2
Monoprice Mini Delta V2
Usable Filament Diameter
1.75 mm
Max Recommended Printing Speed
170 mm/s
Build Area
110 mm x 120 mm
Resolution
40 - 200 µm
Product Overview
Monoprice Mini Delta V2 Specification
| Overview It uses Fused Filament Fabrication 3d printer technology. There's a Bowden extruder inside. This Bowden extruder means that the extruder is mounted on the frame of the actual printer rather than the tip. The filament then travels through a PTFE tube to reach the hot end, and out onto the print. | |||
|---|---|---|---|
Extruder Type | Bowden | ||
Print Technology | Fused Filament Fabrication | ||
| Performance The usable filament diameter is a 1.75 mm diameter. The recommended maximum printing speed is 170 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 110 mm x 120 mm in the Monoprice Mini Delta V2, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. | |||
Usable Filament Diameter | 1.75 mm | ||
Max Power Consumption | 221 W | ||
Build Area | 110 mm x 120 mm | ||
Build Plate Attachment | magnetic | ||
Ambient Operating Temperature | 15°C - 32°C | ||
Max. Nozzle Temperature | 260 ºC | ||
Build Plate Leveling System | manual Leveling | ||
Open Filament System | Yes | ||
Max Build Plate Temperature | 60 ºC | ||
Total Mass Overall Dimensions | 360 mm x 440 mm x 480 mm | ||
Resolution | 40 - 200 µm | ||
Build Chamber During Process | open | ||
Max Recommended Printing Speed | 170 mm/s | ||
| Connectivity | |||
USB Port | Yes | ||
WLAN | Yes | ||
| Features | |||
Touchscreen | Yes | ||
Hepa Filter | No | ||
| System | |||
Weight | 1 kg | ||
Dimensions | 360 mm x 440 mm x 480 mm | ||
Voltage | AC: 100 V - 240 V, 4 A (50 / 60 Hz) | ||
Total Weight | 1 kg | ||
Reviews of the Monoprice Mini Delta V2
4.0
Based on 1 reviews
Great for beginners
- 4