About Leapfrog
Leapfrog Bolt Pro
Usable Filament Diameter
1.75 mm
Max Recommended Printing Speed
100 mm/s
Build Area
330 mm x 320 mm x 205 mm
Layer Height
XY Axis: 50 to 350 micron / 0.05 to 0.35 mm
Leapfrog Bolt Pro Specification
| Overview It uses Fused Filament Fabrication (FFF), Marketed as Fused Deposition Modeling (FDM) 3d printer technology. There's a direct extruder inside. This direct drive extruder means that the extruder is mounted on the printhead. This then pushes the filament directly into, and out of, the hot end and into your print. | |||
|---|---|---|---|
Extruder Type | direct | ||
Print Technology | Fused Filament Fabrication (FFF), Marketed as Fused Deposition Modeling (FDM) | ||
| Performance The printer can use 350 micron / 0.35 mm nozzles. The usable filament diameter is a 1.75 mm diameter. There are 2 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. The recommended maximum printing speed is 100 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 330 mm x 320 mm x 205 mm in the Leapfrog Bolt Pro, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. The build plate is made from Glass. | |||
Usable Filament Diameter | 1.75 mm | ||
Build Plate Material | Glass | ||
Max Power Consumption | 600 W | ||
Build Area | 330 mm x 320 mm x 205 mm | ||
Ambient Operating Temperature | 15ºC - 30ºC | ||
Max. Nozzle Temperature | 518°F / 270°C | ||
Build Volume | 13 x 12.6 x 8.1" / 33.0 x 32 x 20.5 cm (1 Extruder) 11.8 x 12.6 x 8.1" / 30.0 x 32 x 20.5 cm (2 Extruders) | ||
Number of Extruders | 2 | ||
Build Plate Leveling System | Automatic Bed Leveling | ||
Filament Chamber Closed | Yes | ||
Max Build Plate Temperature | 194°F / 90°C | ||
Layer Height | XY Axis: 50 to 350 micron / 0.05 to 0.35 mm | ||
Resolution | XY Axis: 8 micron / 0.008 mm Z Axis: 10 micron / 0.01 mm | ||
Build Chamber During Process | Enclosed | ||
Max Recommended Printing Speed | 100 mm/s | ||
| Connectivity | |||
USB Port | Yes | ||
Ethernet Port | Yes | ||
WLAN | Yes | ||
| Features | |||
Touchscreen | Yes | ||
Hepa Filter | Yes | ||
Camera | Yes | ||
| System | |||
Weight | 134 lb / 60.8 kg | ||
Dimensions | 32.7 x 31.5 x 28.5" / 830.58 x 800.1 x 723.9 mm | ||
Voltage | 88 to 264 VAC, 50 / 60 Hz | ||
Total Weight | 134 lb / 60.8 kg | ||