About FlashForge
FlashForge Inventor
Usable Filament Diameter
1.75 mm
Build Area
230 mm x 150 mm x 160 mm
Layer Height
XY Axis: 50 micron / 0.05 mm Z Axis: 2.5 micron / 0.0025 mm
Resolution
XY Axis: 11 micron / 0.011 mm
FlashForge Inventor Specification
| Performance The printer can use 400 micron / 0.4 mm (Included) nozzles. The usable filament diameter is a 1.75 mm diameter. There are 2 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. You'll get a 230 mm x 150 mm x 160 mm in the FlashForge Inventor, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. | |||
|---|---|---|---|
Usable Filament Diameter | 1.75 mm | ||
Max Power Consumption | 350 W | ||
Build Area | 230 mm x 150 mm x 160 mm | ||
Build Volume | 9.1 x 5.91 x 6.3" / 23.0 x 15 x 16.0 cm | ||
Number of Extruders | 2 | ||
Filament Chamber Closed | Yes | ||
Layer Height | XY Axis: 50 micron / 0.05 mm Z Axis: 2.5 micron / 0.0025 mm | ||
Resolution | XY Axis: 11 micron / 0.011 mm | ||
Build Chamber During Process | Enclosed | ||
| Connectivity | |||
USB Port | Yes | ||
WLAN | Yes | ||
| Features | |||
Touchscreen | Yes | ||
Camera | Yes | ||
Powerloss Fail Safe | Yes | ||
| System | |||
Weight | 32.6 lb / 14.8 kg | ||
Dimensions | 19.09 x 13.54 x 15.04" / 485 x 344 x 382 mm | ||
Voltage | 100 to 240 VAC, 50 / 60 Hz | ||
Total Weight | 32.6 lb / 14.8 kg | ||
