About FlashForge
FlashForge Guider 3
Max Recommended Printing Speed
10 to 250 mm/s
Build Area
300 mm x 250 mm x 340 mm
Layer Height
50 to 400 micron / 0.05 to 0.4 mm
Resolution
XY Axis: 11 micron / 0.011 mm
FlashForge Guider 3 Specification
| Overview It uses Fused Filament Fabrication (FFF) 3d printer technology. There's a direct extruder inside. This direct drive extruder means that the extruder is mounted on the printhead. This then pushes the filament directly into, and out of, the hot end and into your print. | |||
|---|---|---|---|
Extruder Type | direct | ||
Print Technology | Fused Filament Fabrication (FFF) | ||
| Performance The printer can use 400 micron / 0.4 mm nozzles. There are 1 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. The recommended maximum printing speed is 10 to 250 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 300 mm x 250 mm x 340 mm in the FlashForge Guider 3, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. The build plate is made from Steel. | |||
Build Plate Material | Steel | ||
Max Power Consumption | 650 W | ||
Build Area | 300 mm x 250 mm x 340 mm | ||
Ambient Operating Temperature | 15ºC - 30ºC | ||
Max. Nozzle Temperature | 608°F / 320°C | ||
Build Volume | 11.8 x 9.8 x 13.4" / 30.0 x 25 x 34.0 cm | ||
Number of Extruders | 1 | ||
Build Plate Leveling System | Automatic Bed Leveling | ||
Filament Chamber Closed | Yes | ||
Max Build Plate Temperature | 230°F / 110°C | ||
Layer Height | 50 to 400 micron / 0.05 to 0.4 mm | ||
Resolution | XY Axis: 11 micron / 0.011 mm | ||
Build Chamber During Process | Enclosed | ||
Max Recommended Printing Speed | 10 to 250 mm/s | ||
| Connectivity | |||
Cloud Control | Yes | ||
USB Port | Yes | ||
Ethernet Port | Yes | ||
WLAN | Yes | ||
| Features | |||
Touchscreen | Yes | ||
Hepa Filter | Air Filtration | ||
Filament Runout Sensor | Yes | ||
Camera | Yes | ||
Powerloss Fail Safe | Yes | ||
| System | |||
Dimensions | 17.2 x 27.4 x 19.5" / 436 x 696 x 496 mm | ||
Voltage | 100 to 240 VAC, 50 / 60 Hz | ||
