About FlashForge
Flashforge Focus 8.9
Max Recommended Printing Speed
50 mm/h
Build Area
192 mm x 120 mm x 200 mm
Layer Height
0.025 - 0.2 mm
Product Overview
Flashforge Focus 8.9 Specification
| Overview It uses LCD - based SLA 3d printer technology. | |||
|---|---|---|---|
Print Technology | LCD - based SLA | ||
| Performance The recommended maximum printing speed is 50 mm/h. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. The resin UV light type is UV LED and it has a resin wave length of 405 nm. You'll get a 192 mm x 120 mm x 200 mm in the Flashforge Focus 8.9, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. The build plate is made from Sandblasting & Drilling. | |||
Build Plate Material | Sandblasting & Drilling | ||
Max Power Consumption | 320 W | ||
Build Area | 192 mm x 120 mm x 200 mm | ||
Resin UV Wavelength | 405 nm | ||
Resin Display Resolution | 50 µm | ||
Resin UV Light Type | UV LED | ||
Build Volume | 192 mm x 120 mm x 200 mm | ||
Filament Chamber Closed | No | ||
Layer Height | 0.025 - 0.2 mm | ||
Total Mass Overall Dimensions | 300 mm x 300 mm x 536 mm | ||
Build Chamber During Process | closed | ||
Resin Display Type | monochrome LCD | ||
Max Recommended Printing Speed | 50 mm/h | ||
| Connectivity | |||
USB Port | Yes | ||
| Features | |||
Touchscreen | Yes | ||
Hepa Filter | No | ||
| System | |||
Dimensions | 300 mm x 300 mm x 536 mm | ||
