Flashforge Creator Pro vs Dremel Digilab 3D45
When you compare the Flashforge Creator Pro to the Dremel Digilab 3D45 you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.
Specs comparison between the two Printers
| Flashforge Creator Pro | Dremel Digilab 3D45 | |
|---|---|---|
| Overview | ||
| Extruder Type | direct drive | direct drive |
| Performance | ||
| Usable Filament Diameter | 1.75 mm | 1.75 mm |
| Build Plate Material | Heated Glass | |
| Max Power Consumption | 320 W | |
| Build Area | 227 mm x 148 mm x 150 mm | 155 mm x 170 m x 255 mm |
| Build Plate Attachment | fixed | |
| Ambient Operating Temperature | 18°C - 30°C | |
| Internal Memory | Yes,8 Gbyte | |
| Max. Nozzle Temperature | 240 ºC | 280 ºC |
| Build Volume | 155 mm x 170 m x 255 mm | |
| Number of Extruders | 2 | 1 |
| Build Plate Leveling System | manual Leveling | Semi-Auto Leveling |
| Filament Chamber Closed | Yes | |
| Build Plate Surface | adhesive sheet | |
| Open Filament System | Yes | |
| Max Build Plate Temperature | 120 ºC | |
| Layer Height | 0.1 - 0.4 mm | |
| Usable Nozzle Type | ||
| Extruder Construction Type Dual | Dual Head fixed height, manual adjustable | |
| Total Mass Overall Dimensions | 360 mm x 526 mm x 403 mm | 404 mm x 406 mm x 645 mm |
| Resolution | 0.2 mm | 50 - 300 µm |
| Build Chamber During Process | Open or Closed | closed |
| Max Recommended Printing Speed | 100 mm/s | |
| Connectivity | ||
| USB Port | Yes | Yes |
| Ethernet Port | Yes | |
| WLAN | No | Yes |
| Features | ||
| Door Sensor | Yes | |
| Touchscreen | No | Yes |
| Hepa Filter | No | No |
| SD Card | Yes,SD-Card | |
| Filament Runout Sensor | Yes | |
| Camera | Yes | |
| System | ||
| Weight | 14.8 kg | 21.5 kg |
| Dimensions | 360 mm x 526 mm x 403 mm | 404 mm x 406 mm x 645 mm |
| Voltage | AC: 100 V - 230 V (47-63 Hz), DC: 24 V | AC: 100 V - 240 V, .85 - 2.3 A (47- 60 Hz) |
| Total Weight | 14.8 kg | 21.5 kg |