Flashforge Creator Pro vs Anycubic 4max Pro 2.0
When you compare the Flashforge Creator Pro to the Anycubic 4max Pro 2.0 you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.
Specs comparison between the two Printers
| Flashforge Creator Pro | Anycubic 4max Pro 2.0 | |
|---|---|---|
| Overview | ||
| Extruder Type | direct drive | Bowden |
| Print Technology | Fused Deposition Modeling | |
| Performance | ||
| Usable Filament Diameter | 1.75 mm | 1.75 mm |
| Max Power Consumption | 320 W | 350 W |
| Build Area | 227 mm x 148 mm x 150 mm | 270 mm x 210 mm x 190 mm |
| Build Plate Attachment | fixed | |
| Ambient Operating Temperature | 18°C - 30°C | 8°C - 40°C |
| Internal Memory | ||
| Max. Nozzle Temperature | 240 ºC | 260 ºC |
| Build Volume | 270 mm x 210 mm x 190 mm | |
| Number of Extruders | 2 | 1 |
| Build Plate Leveling System | manual Leveling | manual Leveling |
| Filament Chamber Closed | Yes | |
| Build Plate Surface | adhesive sheet | Ultrabase Glass |
| Open Filament System | Yes | Yes |
| Max Build Plate Temperature | 120 ºC | 100 ºC |
| Layer Height | 0.1 - 0.4 mm | |
| Usable Nozzle Type | ||
| Extruder Construction Type Dual | Dual Head fixed height, manual adjustable | |
| Total Mass Overall Dimensions | 360 mm x 526 mm x 403 mm | 454 mm x 466 mm x 410 mm |
| Resolution | 0.2 mm | 50 - 300 µm |
| Build Chamber During Process | Open or Closed | closed |
| Max Recommended Printing Speed | 100 mm/s | 50 mm/s |
| Connectivity | ||
| USB Port | Yes | Yes |
| WLAN | No | |
| Features | ||
| Build Chamber Heater | Yes | |
| Touchscreen | No | Yes |
| Hepa Filter | No | No |
| SD Card | Yes,SD-Card | Yes,SD-Card |
| Filament Runout Sensor | Yes | |
| Powerloss Fail Safe | Yes | |
| System | ||
| Weight | 14.8 kg | 18.8 kg |
| Dimensions | 360 mm x 526 mm x 403 mm | 454 mm x 466 mm x 410 mm |
| Voltage | AC: 100 V - 230 V (47-63 Hz), DC: 24 V | AC: 110 V - 220 V, (50 / 60 Hz) |
| Total Weight | 14.8 kg | 18.8 kg |