When you compare the Flashforge Creator Pro 2 to the FlashForge Creator Max 2 you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.
Flashforge Creator Pro 2Based on 1 reviews
| Flashforge Creator Pro 2 | FlashForge Creator Max 2 | |
|---|---|---|
| Overview | ||
| Extruder Type | direct drive | IDEX |
| Print Technology | Fused Filament Fabrication (FFF) | |
| Performance | ||
| Usable Filament Diameter | 1.75 mm | 1.75 mm |
| Build Plate Material | Aluminum plate | |
| Max Power Consumption | 320 W | |
| Build Area | 200 mm x 148 mm x 150 mm | 200 mm x 148 mm x 150 mm |
| Build Plate Attachment | fixed | |
| Ambient Operating Temperature | 18°C - 30°C | |
| Internal Memory | ||
| Max. Nozzle Temperature | 240 ºC | |
| Build Volume | 7.9 x 5.8 x 5.9" / 20.1 x 14.7 x 15.0 cm | |
| Number of Extruders | 2 | 2 |
| Build Plate Leveling System | manual Leveling | |
| Filament Chamber Closed | Yes | |
| Build Plate Surface | adhesive sheet | |
| Open Filament System | Yes | |
| Max Build Plate Temperature | 120 ºC | 248°F / 120°C |
| Layer Height | 0.1 - 0.4 mm | 100 to 500 micron / 0.001 to 0.005 mm |
| Usable Nozzle Type | MK10 | 4 micron / 0.004 mm (Included) |
| Extruder Construction Type Dual | IDEX - Independent Dual Extruders | |
| Total Mass Overall Dimensions | 526 mm x 360 mm x 550 mm | |
| Resolution | 0.2 mm | |
| Build Chamber During Process | Open or Closed | Enclosed |
| Max Recommended Printing Speed | 100 mm/s | 10 to 100 mm/s |
| Dual Build Area | 200 mm x 148 mm x 150 mm | |
| Connectivity | ||
| USB Port | Yes | Yes |
| WLAN | No | |
| Features | ||
| Touchscreen | Yes | Yes |
| Hepa Filter | No | |
| SD Card | Yes,SD-Card | |
| System | ||
| Weight | 15 kg | 33.1 lb / 15 kg |
| Dimensions | 526 mm x 360 mm x 550 mm | 20.7 x 14.2 x 15.9" / 526 x 360 x 403 mm |
| Voltage | AC: 100 V - 230 V (47-63 Hz) | 100 to 240 VAC, 50 / 60 Hz |
| Total Weight | 15 kg | 33.1 lb / 15 kg |