Flashforge Creator Pro 2 vs Creality CR-6 Max
When you compare the Flashforge Creator Pro 2 to the Creality CR-6 Max you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.
Specs comparison between the two Printers
| Flashforge Creator Pro 2 | Creality CR-6 Max | |
|---|---|---|
| Overview | ||
| Extruder Type | direct drive | Bowden |
| Performance | ||
| Usable Filament Diameter | 1.75 mm | 1.75 mm |
| Build Plate Material | Aluminum plate | Carborundum glass plate |
| Max Power Consumption | 320 W | 500 W |
| Build Area | 200 mm x 148 mm x 150 mm | 400 mm x 400 mm x 400 mm |
| Build Plate Attachment | fixed | clamp |
| Ambient Operating Temperature | 18°C - 30°C | |
| Internal Memory | ||
| Max. Nozzle Temperature | 240 ºC | 260 ºC |
| Number of Extruders | 2 | 1 |
| Build Plate Leveling System | manual Leveling | pressure sensor |
| Build Plate Surface | adhesive sheet | |
| Open Filament System | Yes | Yes |
| Max Build Plate Temperature | 120 ºC | 90 ºC |
| Layer Height | 0.1 - 0.4 mm | 0.1 - 0.4 mm |
| Usable Nozzle Type | MK10 | MK8 |
| Extruder Construction Type Dual | IDEX - Independent Dual Extruders | |
| Total Mass Overall Dimensions | 526 mm x 360 mm x 550 mm | 725 mm x 640 mm x 691 mm |
| Resolution | 0.2 mm | 0.1 mm |
| Build Chamber During Process | Open or Closed | open |
| Max Recommended Printing Speed | 100 mm/s | |
| Dual Build Area | 200 mm x 148 mm x 150 mm | |
| Connectivity | ||
| USB Port | Yes | Yes |
| WLAN | No | No |
| Features | ||
| Touchscreen | Yes | Yes |
| Hepa Filter | No | No |
| SD Card | Yes,SD-Card | Yes |
| Filament Runout Sensor | Yes | |
| Powerloss Fail Safe | Yes | |
| System | ||
| Weight | 15 kg | |
| Dimensions | 526 mm x 360 mm x 550 mm | 725 mm x 640 mm x 691 mm |
| Voltage | AC: 100 V - 230 V (47-63 Hz) | AC: 100 V - 240 V |
| Total Weight | 15 kg | |
