About Creality
Creality CR-30 3DPrintMill
Usable Filament Diameter
1.75 mm
Build Area
200 mm x 170 mm x ∞ mm
Layer Height
0.001 micron / 0.1 mm
Creality CR-30 3DPrintMill Specification
| Overview It uses Fused Filament Fabrication (FFF), Marketed as Fused Deposition Modeling (FDM) 3d printer technology. | |||
|---|---|---|---|
Print Technology | Fused Filament Fabrication (FFF), Marketed as Fused Deposition Modeling (FDM) | ||
| Performance The printer can use 0.004 micron / 0.4 mm nozzles. The usable filament diameter is a 1.75 mm diameter. There are 1 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. You'll get a 200 mm x 170 mm x ∞ mm in the Creality CR-30 3DPrintMill, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. | |||
Usable Filament Diameter | 1.75 mm | ||
Max Power Consumption | 350 W | ||
Build Area | 200 mm x 170 mm x ∞ mm | ||
Max. Nozzle Temperature | 464°F / 240°C | ||
Build Volume | 7.9 x 6.7 x 0" / 20.0 x 17 x 0.0 cm | ||
Number of Extruders | 1 | ||
Open Filament System | Yes | ||
Max Build Plate Temperature | 464°F / 240°C | ||
Layer Height | 0.001 micron / 0.1 mm | ||
Build Chamber During Process | Open | ||
| Connectivity | |||
Cloud Control | Yes | ||
| Features | |||
Touchscreen | Yes | ||
Filament Runout Sensor | Yes | ||
Camera | No | ||
Powerloss Fail Safe | Yes | ||
| System | |||
Weight | 36.4 lb / 16.5 kg | ||
Dimensions | 21.1 x 25.8 x 16.1" / 535 x 656 x 410 mm | ||
Total Weight | 36.4 lb / 16.5 kg | ||
