Anycubic Vyper vs Artillery Sidewinder X1 SW-X1 v4
When you compare the Anycubic Vyper to the Artillery Sidewinder X1 SW-X1 v4 you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.
Anycubic Vyper4.1
Based on 9 reviews
Lowest prices
VS
Specs comparison between the two Printers
| Anycubic Vyper | Artillery Sidewinder X1 SW-X1 v4 | |
|---|---|---|
| Overview | ||
| Extruder Type | Bowden | direct drive |
| Performance | ||
| Usable Filament Diameter | 1.75 mm | 1.75 mm |
| Build Plate Material | Flexible Steel Plate | Ceramic Glass |
| Max Power Consumption | 350 W | 600 W |
| Build Area | 245 mm x 245 mm x 260 mm | 300 mm x 300 mm x 400 mm |
| Build Plate Attachment | magnetic | fixed |
| Ambient Operating Temperature | 8°C - 40°C | 10°C - 50°C |
| Internal Memory | ||
| Max. Nozzle Temperature | 260 ºC | 240 ºC |
| Number of Extruders | 1 | 1 |
| Build Plate Leveling System | manual Leveling | |
| Open Filament System | Yes | Yes |
| Max Build Plate Temperature | 110 ºC | 130 ºC |
| Layer Height | 0.05 - 0.32 mm | |
| Usable Nozzle Type | Volcano | Volcano |
| Total Mass Overall Dimensions | 508 mm x 457 mm x 516 mm | 550 mm x 405 mm x 640 mm |
| Resolution | 0.1 mm | |
| Build Chamber During Process | open | open |
| Max Recommended Printing Speed | 180 mm/s | 150 mm/s |
| Connectivity | ||
| USB Port | Yes | Yes |
| WLAN | No | |
| Features | ||
| Touchscreen | Yes | Yes |
| Hepa Filter | No | No |
| SD Card | Yes | Yes,micro-SD |
| Filament Runout Sensor | Yes | Yes |
| Powerloss Fail Safe | Yes | Yes |
| System | ||
| Weight | 10 kg | 12.4 kg |
| Dimensions | 508 mm x 457 mm x 516 mm | 550 mm x 405 mm x 640 mm |
| Voltage | AC: 100 V / 240 V (50/60 Hz) | AC: 100 V - 230 V (50-60 Hz) |
| Total Weight | 10 kg | 12.4 kg |
