About Wanhao
Compare the Wanhao Duplicator D12/500
Wanhao Duplicator D12/500
Usable Filament Diameter
1.75 mm
Max Recommended Printing Speed
150 mm/s
Build Area
500 mm x 500 mm x 500 mm
Layer Height
0.1 - 0.4 mm
Lowest prices
Product Overview
Wanhao Duplicator D12/500 Specification
| Overview There's a Bowden extruder inside. This Bowden extruder means that the extruder is mounted on the frame of the actual printer rather than the tip. The filament then travels through a PTFE tube to reach the hot end, and out onto the print. | |||
|---|---|---|---|
Extruder Type | Bowden | ||
| Performance The printer can use MK12 nozzles. The usable filament diameter is a 1.75 mm diameter. There are 2 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. The recommended maximum printing speed is 150 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 500 mm x 500 mm x 500 mm in the Wanhao Duplicator D12/500, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. The build plate is made from Flexible Steel Plate. | |||
Usable Filament Diameter | 1.75 mm | ||
Build Plate Material | Flexible Steel Plate | ||
Build Area | 500 mm x 500 mm x 500 mm | ||
Build Plate Attachment | magnetic | ||
Max. Nozzle Temperature | 255 ºC | ||
Number of Extruders | 2 | ||
Build Plate Leveling System | BL-Touch | ||
Build Plate Surface | adhesive sheet | ||
Open Filament System | Yes | ||
Max Build Plate Temperature | 90 ºC | ||
Layer Height | 0.1 - 0.4 mm | ||
Extruder Construction Type Dual | 1 nozzle, mixed | ||
Build Chamber During Process | open | ||
Max Recommended Printing Speed | 150 mm/s | ||
Dual Build Area | 500 mm x 500 mm x 500 mm | ||
| Connectivity | |||
USB Port | Yes | ||
WLAN | Yes | ||
| Features | |||
Touchscreen | Yes | ||
Hepa Filter | No | ||
Filament Runout Sensor | Yes | ||
Powerloss Fail Safe | Yes | ||
Where to buy the Wanhao Duplicator D12/500
The lowest price is $1280 for the Wanhao Duplicator D12/500, available from ultimate3dprintingstore.com.
