Ultimaker S5 vs Ultimaker S3
When you compare the Ultimaker S5 to the Ultimaker S3 you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.
Ultimaker S54.6
Based on 3 reviews
Lowest prices
VS
Specs comparison between the two Printers
| Ultimaker S5 | Ultimaker S3 | |
|---|---|---|
| Overview | ||
| Extruder Type | Bowden | |
| Print Technology | Fused Filament Fabrication | Fused Filament Fabrication |
| Performance | ||
| Usable Filament Diameter | 2.85 mm | 2.85 mm |
| Build Plate Material | Heated Glass | |
| Max Power Consumption | 500 W | 350 W |
| Build Area | 330 mm x 240 mm x 300 mm | 230 mm x 190 mm x 200 mm |
| Ambient Operating Temperature | 15°C - 32°C | 15°C - 32°C |
| Max. Nozzle Temperature | 280 ºC | 280 ºC |
| Build Volume | 330 mm x 240 mm x 300 mm | 230 mm x 190 mm x 200 mm |
| Number of Extruders | 2 | 2 |
| Build Plate Leveling System | Advanced Active Leveling | Advanced Active Leveling |
| Filament Chamber Closed | Yes | Yes |
| Open Filament System | Yes | Yes |
| Max Build Plate Temperature | 140 ºC | 140 ºC |
| Layer Height | 0.020 mm | |
| Extruder Construction Type Dual | Dual-head with electronic lifting system | Dual-head with electronic lifting system |
| Total Mass Overall Dimensions | 495 mm x 585 mm x 780 mm | 394 mm x 489 mm x 637 mm |
| Resolution | 20 - 600 µm | 20 - 600 µm |
| Build Chamber During Process | closed | closed |
| Connectivity | ||
| Cloud Control | Yes | |
| USB Port | Yes | Yes |
| Ethernet Port | Yes | Yes |
| WLAN | Yes | Yes |
| Features | ||
| Build Chamber Heater | Yes, max 60°C | |
| Touchscreen | Yes | Yes |
| Hepa Filter | No | No |
| Filament Runout Sensor | Yes | Yes |
| Camera | Yes | |
| System | ||
| Weight | 20.6 kg | 14.4 kg |
| Dimensions | 495 mm x 585 mm x 780 mm | 394 mm x 489 mm x 637 mm |
| Voltage | AC: 100 V - 240 V, (50 - 60 Hz) | |
| Total Weight | 20.6 kg | 14.4 kg |