Ultimaker S5 vs Raise3D Pro2

When you compare the Ultimaker S5 to the Raise3D Pro2 you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.

Ultimaker S5Ultimaker S5


Based on 3 reviews

Raise3D Pro2Raise3D Pro2


Based on 2 reviews

Specs comparison between the two Printers

Ultimaker S5Raise3D Pro2
Extruder Typedirect drive
Print TechnologyFused Filament Fabrication
Usable Filament Diameter2.85 mm1.75 mm
Build Plate MaterialAluminum plate
Max Power Consumption500 W600 W
Build Area330 mm x 240 mm x 300 mm305 mm x 305 mm x 300 mm
Build Plate Attachmentmagnetic /screws
Ambient Operating Temperature15°C - 32°C15°C - 30°C
Internal MemoryYes,8 Gbyte
Max. Nozzle Temperature280 ºC300 ºC
Build Volume330 mm x 240 mm x 300 mm
Number of Extruders22
Build Plate Leveling SystemAdvanced Active LevelingPre-calibrated - manual Leveling
Filament Chamber ClosedYesYes
Build Plate SurfaceBuildTak
Open Filament SystemYesYes
Max Build Plate Temperature140 ºC110 ºC
Layer Height0.01 - mm
Usable Nozzle TypeRaise3D Pro2
Extruder Construction Type DualDual-head with electronic lifting systemDual-head with electronic lifting system
Total Mass Overall Dimensions495 mm x 585 mm x 780 mm590 mm x 620 mm x 760 mm
Resolution20 - 600 µm
Build Chamber During ProcessclosedOpen or Closed
Max Recommended Printing Speed150 mm/s
Dual Build Area305 mm x 280 mm x 300 mm
Cloud ControlYes
USB PortYesYes
Ethernet PortYesYes
Hepa FilterNoYes
SD Card
Filament Runout SensorYesYes
Powerloss Fail SafeYes
Weight20.6 kg50.2 kg
Dimensions495 mm x 585 mm x 780 mm590 mm x 620 mm x 760 mm
VoltageAC: 100 V, 3,3 A / 230 V (50/60 Hz)
Total Weight20.6 kg50.2 kg

Other popular comparisons