Ultimaker S5 vs Original Prusa i3 MK3S+
When you compare the Ultimaker S5 to the Original Prusa i3 MK3S+ you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.
Specs comparison between the two Printers
| Ultimaker S5 | Original Prusa i3 MK3S+ | |
|---|---|---|
| Overview | ||
| Extruder Type | direct drive | |
| Print Technology | Fused Filament Fabrication | |
| Performance | ||
| Usable Filament Diameter | 2.85 mm | 1.75 mm |
| Max Power Consumption | 500 W | 120 W |
| Build Area | 330 mm x 240 mm x 300 mm | 210 mm x 210 mm x 250 mm |
| Ambient Operating Temperature | 15°C - 32°C | |
| Max. Nozzle Temperature | 280 ºC | 300 ºC |
| Build Volume | 330 mm x 240 mm x 300 mm | 210 mm x 210 mm x 250 mm |
| Number of Extruders | 2 | 1 |
| Build Plate Leveling System | Advanced Active Leveling | Mesh Bed Levelling |
| Filament Chamber Closed | Yes | |
| Open Filament System | Yes | |
| Max Build Plate Temperature | 140 ºC | 120 ºC |
| Layer Height | 0.05 - 0.35 mm | |
| Extruder Construction Type Dual | Dual-head with electronic lifting system | |
| Total Mass Overall Dimensions | 495 mm x 585 mm x 780 mm | 400 mm x 500 mm x 550 mm |
| Resolution | 20 - 600 µm | |
| Build Chamber During Process | closed | open |
| Resin Display Type | monochrome LCD | |
| Connectivity | ||
| USB Port | Yes | Yes |
| Ethernet Port | Yes | Yes |
| WLAN | Yes | Yes |
| Features | ||
| Touchscreen | Yes | No |
| Hepa Filter | No | No |
| SD Card | Yes,SD-Card | |
| Filament Runout Sensor | Yes | Yes |
| System | ||
| Weight | 20.6 kg | 7 kg |
| Dimensions | 495 mm x 585 mm x 780 mm | 400 mm x 500 mm x 550 mm |
| Total Weight | 20.6 kg | 7 kg |