Ultimaker S5 vs Lulzbot TAZ Pro
When you compare the Ultimaker S5 to the Lulzbot TAZ Pro you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.
Specs comparison between the two Printers
| Ultimaker S5 | Lulzbot TAZ Pro | |
|---|---|---|
| Overview | ||
| Extruder Type | direct drive | |
| Print Technology | Fused Filament Fabrication | Fused Filament Fabrication |
| Performance | ||
| Usable Filament Diameter | 2.85 mm | 2.85 mm |
| Max Power Consumption | 500 W | 500 W |
| Build Area | 330 mm x 240 mm x 300 mm | 280 mm x 280 mm x 285 mm |
| Ambient Operating Temperature | 15°C - 32°C | 5°C - 45°C |
| Max. Nozzle Temperature | 280 ºC | 290 ºC |
| Build Volume | 330 mm x 240 mm x 300 mm | |
| Number of Extruders | 2 | 2 |
| Build Plate Leveling System | Advanced Active Leveling | Automatic Bed Leveling |
| Filament Chamber Closed | Yes | |
| Build Plate Surface | Borosilicate glass / PEI | |
| Open Filament System | Yes | Yes |
| Max Build Plate Temperature | 140 ºC | 120 ºC |
| Extruder Construction Type Dual | Dual-head with electronic lifting system | |
| Total Mass Overall Dimensions | 495 mm x 585 mm x 780 mm | 832 mm x 710 mm x 520 mm |
| Resolution | 20 - 600 µm | 50 - 900 µm |
| Build Chamber During Process | closed | open |
| Max Recommended Printing Speed | 200 mm/s | |
| Connectivity | ||
| USB Port | Yes | Yes |
| Ethernet Port | Yes | |
| WLAN | Yes | |
| Features | ||
| Touchscreen | Yes | Yes |
| Hepa Filter | No | Yes |
| SD Card | Yes,SD-Card | |
| Filament Runout Sensor | Yes | |
| System | ||
| Weight | 20.6 kg | 16.78 kg |
| Dimensions | 495 mm x 585 mm x 780 mm | 832 mm x 710 mm x 520 mm |
| Voltage | AC: 100 V - 240 V, 3.2 A (50 - 60 Hz) | |
| Total Weight | 20.6 kg | 16.78 kg |