30 to 150 mm/s
330 mm x 239 mm x 239 mm
20 to 250 micron / 0.02 to 0.25 mm
It uses Fused Filament Fabrication (FFF) 3d printer technology.
There's a IDEX extruder inside.
|Fused Filament Fabrication (FFF)|
The printer can use 400 micron / 0.4 mm (Included) nozzles.
The usable filament diameter is a 1.75 mm diameter.
There are 2 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once.
The recommended maximum printing speed is 30 to 150 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like.
You'll get a 330 mm x 239 mm x 239 mm in the Raise 3D E2 Desktop with IDEX, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area.
The build plate is made from Steel.
Usable Filament Diameter
Build Plate Material
|330 mm x 239 mm x 239 mm|
Build Plate Attachment
Ambient Operating Temperature
|15ºC - 30ºC|
Max. Nozzle Temperature
|572°F / 300°C|
|13 x 9.4 x 9.4" / 33.0 x 23.9 x 23.9 cm (1 Extruder) 11.6 x 9.4 x 9.4" / 29.5 x 23.9 x 23.9 cm (2 Extruders)|
Number of Extruders
Build Plate Leveling System
|Automatic Bed Leveling|
Filament Chamber Closed
Max Build Plate Temperature
|230°F / 110°C|
|20 to 250 micron / 0.02 to 0.25 mm|
|XY Axis: 0.78125 micron / 0.00078125 mm Z Axis: 0.078125 micron / 0.000078125 mm|
Build Chamber During Process
Max Recommended Printing Speed
|30 to 150 mm/s|
Filament Runout Sensor
Powerloss Fail Safe
|77.2 lb / 35 kg|
|23.9 x 18.3 x 23.5" / 0.6 x 0.5 x 0.6 m|
|100 to 240 VAC, 50 / 60 Hz at 2 A|
|77.2 lb / 35 kg|