About Monoprice
Monoprice MP Cadet
Usable Filament Diameter
1.75 mm
Max Recommended Printing Speed
150 mm/s
Build Area
100 mm x 105 mm x 100 mm
Resolution
50 - 200 µm
Product Overview
Monoprice MP Cadet Specification
| Overview It uses Fused Filament Fabrication 3d printer technology. There's a Bowden extruder inside. This Bowden extruder means that the extruder is mounted on the frame of the actual printer rather than the tip. The filament then travels through a PTFE tube to reach the hot end, and out onto the print. | |||
|---|---|---|---|
Extruder Type | Bowden | ||
Print Technology | Fused Filament Fabrication | ||
| Performance The usable filament diameter is a 1.75 mm diameter. The recommended maximum printing speed is 150 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 100 mm x 105 mm x 100 mm in the Monoprice MP Cadet, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. | |||
Usable Filament Diameter | 1.75 mm | ||
Build Area | 100 mm x 105 mm x 100 mm | ||
Max. Nozzle Temperature | 250 ºC | ||
Build Plate Leveling System | Automatic Bed Leveling | ||
Filament Chamber Closed | No | ||
Max Build Plate Temperature | 50 ºC | ||
Total Mass Overall Dimensions | 210 mm x 210 mm x 290 mm | ||
Resolution | 50 - 200 µm | ||
Build Chamber During Process | closed | ||
Max Recommended Printing Speed | 150 mm/s | ||
| Connectivity | |||
USB Port | Yes | ||
WLAN | Yes | ||
| Features | |||
Touchscreen | No | ||
Hepa Filter | No | ||
| System | |||
Weight | 3 kg | ||
Dimensions | 210 mm x 210 mm x 290 mm | ||
Total Weight | 3 kg | ||
Reviews of the Monoprice MP Cadet
4.0
Based on 1 reviews
Monoprice MP Cadet
- 4