About Makerbot
Makerbot Method X Carbon Fiber Edition
Usable Filament Diameter
1.75 mm
Max Recommended Printing Speed
500 mm/s
Build Area
190 mm x 190 mm x 196 mm
Layer Height
0.020 mm
Product Overview
Makerbot Method X Carbon Fiber Edition Specification
| Overview It uses Fused Deposition Modeling 3d printer technology. There's a direct drive extruder inside. This direct drive extruder means that the extruder is mounted on the printhead. This then pushes the filament directly into, and out of, the hot end and into your print. | |||
|---|---|---|---|
Extruder Type | direct drive | ||
Print Technology | Fused Deposition Modeling | ||
| Performance The usable filament diameter is a 1.75 mm diameter. There are 2 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. The recommended maximum printing speed is 500 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 190 mm x 190 mm x 196 mm in the Makerbot Method X Carbon Fiber Edition, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. The build plate is made from Flexible Plate. | |||
Usable Filament Diameter | 1.75 mm | ||
Build Plate Material | Flexible Plate | ||
Max Power Consumption | 800 W | ||
Build Area | 190 mm x 190 mm x 196 mm | ||
Max. Nozzle Temperature | 300 ºC | ||
Build Volume | 190 mm x 190 mm x 196 mm | ||
Number of Extruders | 2 | ||
Filament Chamber Closed | Yes | ||
Build Plate Surface | Reusable Grip Surface | ||
Open Filament System | Yes | ||
Max Build Plate Temperature | 110 ºC | ||
Layer Height | 0.020 mm | ||
Extruder Construction Type Dual | Dual Head fixed height, manual adjustable | ||
Total Mass Overall Dimensions | 437 mm x 413 mm x 649 mm | ||
Resolution | 20 - 400 µm | ||
Build Chamber During Process | closed | ||
Max Recommended Printing Speed | 500 mm/s | ||
| Connectivity | |||
WLAN | Yes | ||
| Features | |||
Door Sensor | Yes | ||
Build Chamber Heater | Yes, max 110°C | ||
Touchscreen | Yes | ||
Hepa Filter | No | ||
Filament Runout Sensor | Yes | ||
Camera | Yes | ||
| System | |||
Weight | 29.5 kg | ||
Dimensions | 437 mm x 413 mm x 649 mm | ||
Voltage | AC: 100 V - 240 V, 8.1 - 3.4 A (50 / 60 Hz) | ||
Total Weight | 29.5 kg | ||
