About Craftbot
CraftBot 2
Usable Filament Diameter
1.75 mm
Max Recommended Printing Speed
50 to 200 mm/s
Build Area
249 mm x 200 mm x 200 mm
Layer Height
XY Axis: 100 to 300 micron / 0.1 to 0.3 mm (3 Settings)
CraftBot 2 Specification
| Overview There's a direct extruder inside. This direct drive extruder means that the extruder is mounted on the printhead. This then pushes the filament directly into, and out of, the hot end and into your print. | |||
|---|---|---|---|
Extruder Type | direct | ||
| Performance The printer can use 400 micron / 0.4 mm (Included) nozzles. The usable filament diameter is a 1.75 mm diameter. There are 1 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. The recommended maximum printing speed is 50 to 200 mm/s. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 249 mm x 200 mm x 200 mm in the CraftBot 2, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. | |||
Usable Filament Diameter | 1.75 mm | ||
Build Area | 249 mm x 200 mm x 200 mm | ||
Max. Nozzle Temperature | 356 to 500°F / 180 to 260°C | ||
Build Volume | 9.8 x 7.87 x 7.9" / 25.0 x 20 x 20.0 cm | ||
Number of Extruders | 1 | ||
Max Build Plate Temperature | 122 to 230°F / 50 to 110°C | ||
Layer Height | XY Axis: 100 to 300 micron / 0.1 to 0.3 mm (3 Settings) | ||
Resolution | XY Axis: 4 micron / 0.004 mm Z Axis: 2 micron / 0.002 mm | ||
Build Chamber During Process | Open | ||
Max Recommended Printing Speed | 50 to 200 mm/s | ||
| Connectivity | |||
USB Port | Yes | ||
WLAN | Yes | ||
| Features | |||
Touchscreen | Yes | ||
Camera | No | ||
| System | |||
Weight | 30.9 lb / 14 kg | ||
Dimensions | 15.75 x 18.11 x 17.72" / 40 x 46 x 45 cm | ||
Total Weight | 30.9 lb / 14 kg | ||