Anycubic Photon Mono X vs formlabs Form 3L
When you compare the Anycubic Photon Mono X to the formlabs Form 3L you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.
Specs comparison between the two Printers
| Anycubic Photon Mono X | formlabs Form 3L | |
|---|---|---|
| Overview | ||
| Print Technology | LCD - based SLA | Low Force Stereolithography |
| Performance | ||
| Max Power Consumption | 120 W | 650 W |
| Build Area | 192 mm x 120 mm x 245 mm | 335 mm x 200 mm x 300 mm |
| Resin UV Wavelength | 405 nm | |
| Ambient Operating Temperature | 18°C - 28°C | |
| Resin Display Resolution | 50 µm | 25 µm |
| Resin UV Light Type | High-quality filament | |
| Build Volume | 192 mm x 120 mm x 245 mm | 335 mm x 200 mm x 300 mm |
| Build Plate Leveling System | Semi-Auto Leveling | Automatic Bed Leveling |
| Filament Chamber Closed | Yes | |
| Layer Height | 0.01 mm | 0.025 - 0.3 mm |
| Total Mass Overall Dimensions | 270 mm x 290 mm x 475 mm | 777 mm x 520 mm x 740 mm |
| Resolution | 10 - 150 µm | |
| Resin Display Resolution Y | 2400 pixel | 720 pixel |
| Resin Display Resolution X | 3840 pixel | 1280 pixel |
| Build Chamber During Process | Open or Closed | closed |
| Resin Display Type | monochrome LCD | |
| Max Recommended Printing Speed | 60 mm/h | |
| Connectivity | ||
| Cloud Control | Yes | |
| USB Port | Yes | Yes |
| Ethernet Port | Yes | |
| WLAN | Yes | Yes |
| Features | ||
| Build Chamber Heater | Yes, Air-heated print chamber | |
| Touchscreen | Yes | Yes |
| Hepa Filter | No | No |
| SD Card | Yes,SD-Card | |
| System | ||
| Weight | 10.75 kg | 54.4 kg |
| Dimensions | 270 mm x 290 mm x 475 mm | 777 mm x 520 mm x 740 mm |
| Voltage | AC: 100 V - 240 V, 8.5 A (50 / 60 Hz) | |
| Total Weight | 10.75 kg | 54.4 kg |